Sharp AR-201 Operation Manual Download Page 13

Page: 13 / 84

GETTING ST

TED

Changing the copy paper size in the tray

Gently lift and pull out the paper tray until it stops.

Push the pressure plate down until it locks in place.

Squeeze the lock lever of the front guide and slide the
front guide to match the width of the paper.

Move the left guide to the appropriate slot as marked
on the tray.

●

When using A5 (5-1/2" x 8-1/2") copy paper, load it into the
uppermost paper tray. If other trays (including trays in optional paper
feed units) are used, paper misfeeds may occur.

●

With inch system machines, when using 11" x 17" copy paper, store
the left guide in the slot at the left front of the paper tray.

Load copy paper into the tray.

Place the appropriate label to indicate the selected
paper size into the recess on the right front side of the
paper tray.

Push the paper tray firmly back into the copier.

Loading cop

y paper

LOADING COPY PAPER

Front guide

Left guide

Summary of Contents for AR-201





















































































Search results

Summary of Contents for AR-201

Reviews:

Related manuals for AR-201

Brands by name

Popular brands

Sharp AR-201, Operation Manual

Search results

Summary of Contents for AR-201

Reviews:

Related manuals for AR-201

Brands by name

Popular brands