AR-168N/168L SPECIFICATIONS 2 - 2
*1) May fluctuate due to environmental conditions and the input voltage.
3. Copy performance
Fusing section
Fusing system
Heat roller system
Upper heat roller
type
Teflon roller
Lower heat roller
type
Silicon rubber roller
Heater lamp
type
Halogen lamp
Voltage
120V
Power consumption
800W
Electrical section
Power source
Voltage
120V
Frequency
60Hz
Rated current
8A
Power consumption
Max.
Less than 1000W
Average (during copying) 350 Wh/H *1)
Average (stand-by)
86Wh/H *1)
Pre-heat mode
25Wh/H *1)
Auto power shut-off mode 8.8Wh/H *1)
Section, item
Details
Copy magnification
Fixed magnification
ratios
4 Red 3 Enlargement
(AB system : 25, 50, 70, 86, 100, 141, 200, 400%)
(Inch system : 25, 50, 64, 78, 100, 129, 200, 400%)
Zooming
magnification ratios
OC: 25 - 400% (376 steps in 1% increments), RSPF: 50 - 200% (151 steps
in 1% increments)
Manual steps (text, photo)
5 steps
Copy speed
First copy time
Tray paper feed 9.6 sec. (Pre-heat mode: 25 sec. / Auto power-shut-off mode: 40 sec.)
A4 or Letter/100%/Auto Exposure *1)
AB system
A4
(Landscape)
Copy speed (CPM) Same size
15
Enlargement
15
Reduction
15
AB system
B5
(Landscape)
Copy speed (CPM) Same size
15
Enlargement
15
Reduction
15
Inch system
8-1/2" x 14"
(Landscape)
Copy speed (CPM) Same size
12
Enlargement
12
Reduction
12
Inch system
8-1/2" x 11"
(Landscape)
Copy speed (CPM) Same size
16
Enlargement
16
Reduction
16
Max. continuous copy quantity
99 (Multi-copy)
Void
Void area
leading edge
1 - 4mm
Trailing edge
4mm or less, 6mm or less (Duplex copying/both image)
Side void area
0.5mm or more (per side)
4.5mm or less (total of both sides)
Image loss
leading edge
Same size: 3.0mm or less (OC) / 4.0mm or less (R-SPF/Duplex)
Enlarge: 1.5mm or less (OC) / 3.0mm or less (R-SPF/Duplex)
Reduction (50%): 6.0mm or less (OC) / 8.0mm or less (R-SPF/Duplex)
Warm-up time
0 sec.
Power save mode reset time
0 sec.
Paper jam recovery time
0 sec.
Section, item
Details
*1) Under the polygon ready condition.
02̲SPECI.fm 2 ページ ２００５年１１月１８日 金曜日 午後５時２６分
