background image

7

1

Getting star

ted

OPERATION PANEL

Original to copy key and indicators

: Two-sided copies from one-

sided originals.
Turn on Long Edge or Turn on
Short Edge can be selected.

: Two-sided copies from two-

sided originals. (Can be
selected only when the RSPF
is used.)

: One-sided copies from two-

sided originals. (Can be
selected only when the RSPF
is used.)

Exposure mode selector key and indicators

Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO. Selected
mode is shown by a lit indicator. (p. 16)

Light and dark keys and exposure indicators

Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level is
shown by a lit indicator. (p.16)
Use to start and terminate user program
setting. (p. 21)

Alarm indicators

: Developer replacement required

indicator (p. 32)

: Misfeed indicator (p. 27)
: Toner cartridge replacement required

indicator (p. 23)

: Maintenance indicator (p. 32)

RSPF indicator 

(p. 13)

RSPF misfeed indicator 

(p. 30)

Copy ratio selector key and copy ratio
indicators

Use to sequentially select preset reduction/
enlargement copy ratios.
Selected copy ratio is shown by a lit indicator.
(p. 17)

Zoom indicator 

(p. 17)

Copy ratio display (%) key

 (p. 17)

Display

Displays the specified copy quantity, zoom
copy ratio, user program code, and error
code.

ON LINE indicator

Lights up when the machine is used as a
printer. To use the copier as a printer, an
optional printer expansion kit is needed.

ON LINE key

Changes between the on-line and off-line
modes when the PCL expansion kit has been
installed and a PCL printer is used.
Changes modes from the off-line to on-line
when the GDI expansion kit has been installed
and a GDI printer is used.

DATA indicator

Indicates that the printer is receiving or
processing print data. To use the copier as a
printer, an optional PCL expansion kit is
needed.

Power save indicator

Lights up when the copier is in a power save
mode. (p. 20, 21)

Tray select key

Use to select a paper feed station (paper tray
or bypass tray). (p. 19)

Paper feed location indicators

Light up to show the selected paper feed
station.

Zoom keys

Use to select any reduction or enlargement
copy ratio from 50 to 200% in 1% increments.
(p. 17)

Copy quantity keys

Use to select the desired copy quantity (1 to
99). (p. 15)

Use to make user program entries. (p. 21)

Clear key

Press to clear the display, or press during a
copy run to terminate copying. (p. 15)

Press and hold down during standby to
display the total number of copies made to
date. (p. 22)

Print key and ready indicator

Copying is possible when the indicator is on.

Use to set a user program.

Summary of Contents for AR-156





















































Reviews: