10
2
Installation
LOADING COPY PAPER
1
Raise the handle of the paper tray and pull the paper tray out until it stops.
2
Adjust the paper guides on the paper tray to the copy paper width and length.
Squeeze the lever of paper guide
and slide the guide to match with the width of the
paper.
Move paper guide
to the appropriate slot as marked on the tray.
Paper guide B
Paper guide A
3
Fan the copy paper and insert it into the tray. Make sure the edges go under the corner
hooks.
Do not load paper above the maximum height line (
). Exceeding the line
will cause a paper misfeed.
4
Gently push the paper tray back into the copier.
After loading copy paper, to cancel the blinking “P” without restarting copying,
press the clear (
) key. The “P” in the display will go out and the ready (
)
indicator will light up.
chap-2_AR121151EX.p65
30/11/00, 19:07
10
