5
shv34̲e̲01.fm
[5/27]
◎
The back cover of the product cannot be removed. Removing it forcibly
may cause damage or a fault.
◎
The battery is built into the product, and cannot be removed by the
customer. To force the power off, refer to “Turning the Power Off Forcibly”
au Nano IC Card 04/microSD memory card cover
◎
Note that pulling or applying excessive force on an au Nano IC Card 04/
microSD memory card cover may cause damage.
IMEI tray
◎
An IMEI (international mobile station equipment identity) is a special
identification code assigned to each phone. You can pull the IMEI tray out
to confirm the IMEI of the product.
◎
The IMEI is information required when requesting servicing or repairs.
◎
The IMEI tray cannot be removed from the main unit. Take care not to
apply force when handling.
◎
You can also operate the product to confirm the IMEI.
On the home screen, “Apps Sheet”
[
[Settings]
[
[About phone]
[
[Status]
[
[SIM status] and confirm the IMEI field.
Display (Touch panel)
◎
If the product is equipped with a commercially available corresponding
flip cover, you can turn the display on/off by opening/closing the flip
cover. If you close the equipped flip cover obliquely, the display may not
be turned off.
Proximity sensor /Light sensor, proximity sensors , earpiece
(receiver), mouthpiece (microphone), speaker, sub microphone, air vent
(inside of the strap eyelet)
◎
Placing stickers, etc. over the proximity sensor (upper part of the
display)/ light sensor, proximity sensors
◎
Covering earpiece (receiver), mouthpiece (microphone), speaker or sub
microphone, strap eyelet with stickers, fingers, etc. may hinder product
performance.
◎
Be careful not to cover the earpiece (receiver) by a strap attached to the
product during a call etc.
Internal antenna, Wi-Fi
®
/Bluetooth
®
antennas, Wi-Fi
®
/GPS/TV antennas
◎
Antennas are built into the product. Do not cover with hand during calls or
data communication. Doing so may affect call/communication quality.
shv34_e.book 5 ページ ２０１６年６月３日 金曜日 午前１１時２５分
