LC-32D47U/LC-32SB27U/LC-C3237U
2 – 7
Troubleshooting
Problem
Possible Solution
No power
•
Check if you pressed
POWER
on the remote control unit. If the indicator on the TV
does not light up, press
POWER
on the TV.
Is the AC cord disconnected?
Has the power been turned on?
•
•
•
Unit cannot be operated.
•
External influences such as lightning, static electricity, may cause improper
operation. In this case, operate the unit after first turning off the power of the TV or
unplugging the AC cord and replugging it in after 1 or 2 minutes.
•
Remote control unit does not
operate.
•
Are batteries inserted with polarity (+, -) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminated near the remote control sensor?
•
•
•
•
Picture is cut off/with sidebar
screen.
•
Is the image position correct?
Are screen mode adjustments such as picture size made correctly?
•
•
Strange color, light color, or color
misalignment
•
Adjust the picture tone.
Is the room too bright? The picture may look dark in a room that is too bright.
Check the input signal setting.
•
•
•
Power is suddenly turned off.
•
Is the sleep timer set?
Check the power control settings.
The unit's internal temperature has increased. Remove any objects blocking vent or
clean.
•
•
•
No picture
•
Is connection to other components correct?
Is correct input signal source selected after connection?
Is the correct input selected?
Is picture adjustment correct?
Is “On” selected in “Audio Only”?
Is a non-compatible signal being input?
•
•
•
•
•
•
No sound
•
Is the volume too low?
Is “Variable” selected in “Output Select”?
Have you pressed
MUTE
on the remote control unit?
•
•
•
The TV sometimes makes a
cracking sound.
•
This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance.
•
Troubleshooting-Digital Broadcasting
The error message about reception of broadcast
The example of an error message
displayed on a screen
Possible Solution
Failed to receive broadcast.
•
Check the antenna cable. Check that the antenna is correctly setup.
•
No broadcast now.
•
Check the broadcast time in the program guide.
•
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: -4°F to
+ 140°F (-20°C to +60°C)
•
•
Appendix
Summary of Contents for AQUOS LC-C3237U
