Sharp Aquos LC-60UD27U Operation Manual Download Page 86

Page: 86 / 170

Using AQUOS LINK

Controlling HDMI Equipment Using AQUOS LINK

What’s AQUOS LINK?

Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can

interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).

By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can

control a recorder or AV amplifier using the remote control of the TV.

AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.

NOTE

Connect 4K signals (HDCP2.2) to the HDMI IN 4 terminal. These signals will not be displayed if

connected to the HDMI IN 1, 2, or 3 terminals.

For connecting the TV to AQUOS LINK-compatible equipment, use commercially available

cables.

Point the remote control toward the TV, not to connected HDMI equipment.
Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-

certified cable.

Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this

system.

These operations affect the HDMI equipment selected as the current input source. If the

equipment does not operate, turn on the equipment and select the appropriate input source
using

INPUT

The AQUOS LINK feature may not operate properly when an HDMI splitter or AV selector unit

is used. These devices may cause interruptions to the image and/or sound.

Connected AQUOS LINK-compatible devices can be operated without changing the settings of the
remote control unit.
The

OPTION

button will function only when AQUOS LINK is used.

One Touch Play

While the TV is in standby mode, it automatically turns on and plays back the image from the
HDMI source.

Single remote control

The AQUOS LINK automatically recognizes the connected HDMI device and you can control the
TV and the devices as if using a universal remote control.

Control the AQUOS LINK-compatible audio system

Set the volume of AQUOS LINK-compatible audio system.

NOTE

The above description is an example of the AQUOS LINK function.
The steps in "AQUOS LINK Setup" on

page 6-2 need to be completed beforehand.

Refer to this operation manual and the operation manual of the AQUOS LINK device to be used

with this TV.

ENG 6-1

Summary of Contents for Aquos LC-60UD27U











































































































































































Search results

Summary of Contents for Aquos LC-60UD27U

Reviews:

Related manuals for Aquos LC-60UD27U

Brands by name

Popular brands

Sharp Aquos LC-60UD27U, Operation Manual

Search results

Summary of Contents for Aquos LC-60UD27U

Reviews:

Related manuals for Aquos LC-60UD27U

Brands by name

Popular brands