Sharp Aquos LC-60UD1H Page 7 Operation Manual Download

Page: 7 / 90

Attaching the stand unit

• Before attaching (or detaching) the stand, unplug the AC

cord.

• Before performing work, spread cushioning over the surface

on which you will be laying the TV. This will prevent it from
being damaged.

• Be sure that two or more persons attach the stand.

CAUTION

•

Attach the stand in the correct direction.

•

Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.

•

After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the
TV.

•

Do not remove the stand from the TV unless using a
wall mount bracket to mount it.

Confirm that there are 11 screws (four M6 screws,
four M5 screws and three M4 screw) supplied with
the stand unit.

LC-70UD1H

LC-60UD1H

Attach the supporting post to the stand base.

Insert the claws of the supporting post into the stand
base.

Secure the post and the base using the M6 screws
(LC-70UD1H: length 25 mm, LC-60UD1H: length 10
mm) and a screwdriver (not supplied).

M6 screws

Supporting
post

Stand base

NOTE

• LC-70UD1H: Tighten the screws to the holes of the mark

“B”.

• LC-60UD1H: Tighten the screws to the holes of the mark

“A”.

Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).

• Make sure that the stand is firmly inserted into the TV.

Improper installation may result in tilting of the TV set.

Soft cushion

Insert and tighten the M5 screws (length: 14 mm)
into the holes on the rear of the TV.

M5 screws

Attaching the stand cover.

Insert the stand cover.

Insert and tighten the M4 screw (length: 8 mm) into the
holes of the stand cover.

• Tighten the screw by pressing the bottom of the

stand base to the TV side.

Stand
cover

M4 screws

NOTE

•  To detach the stand unit, perform the steps in reverse order.
•  A screwdriver is not supplied with this product.
•  In the installation procedure, be careful not to catch your

fingers between the TV set and the floor.

Preparation

LC-6070UD1H_EN_book.indb 7

1/2/2014 8:56:59 AM

Summary of Contents for Aquos LC-60UD1H



























































































Search results

Summary of Contents for Aquos LC-60UD1H

Reviews:

Related manuals for Aquos LC-60UD1H

Brands by name

Popular brands

Sharp Aquos LC-60UD1H, Operation Manual

Search results

Summary of Contents for Aquos LC-60UD1H

Reviews:

Related manuals for Aquos LC-60UD1H

Brands by name

Popular brands