20
Direct Button Operation
MUTE
Mutes the current sound output.
Press
MUTE
.
•
"
" will be displayed on the screen for 30 minutes, and
the sound is silenced.
•
Within 30 minutes of pressing
MUTE
, mute can be
canceled by pressing
VOL
k
/
l
or
MUTE
.
•
Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
Sleep Timer
Allows you to set a time when the TV automatically
switches to standby.
Press
SLEEP
.
•
The remaining time displays when the sleep timer has been set.
•
Each time you press
SLEEP
, the remaining time switches
as shown below.
Off 30 60 90 120
•
When set, the time automatically starts counting down.
•
If you want to adjust the sleep timer, you can press
SLEEP
twice then change the time setting.
•
When it is 5 minutes before the time expires, the remaining
time will start to keep appearing every minute.
•
Select "Off" by pressing
SLEEP
to cancel the sleep timer.
•
The TV will enter standby when the remaining time reaches 0.
FLASHBACK
Press
FLASHBACK
to switch to the previously tuned
channel.
•
Press
FLASHBACK
again to switch back to the currently
tuned channel.
•
FLASHBACK
will not work if no channel has been
changed after the TV is turned on.
FREEZE
Allows you to capture and freeze a moving image that
you are watching.
Press
FREEZE
.
•
A moving image is captured.
•
Press
FREEZE
again to cancel the function.
•
When this function is not available, "No displaying still
image available." will display.
•
The still image automatically goes out after 30 minutes.
•
If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
canceled and a V-CHIP BLOCK message will appear.
• You can have the same settings by choosing "Freeze" on
the menu items. (See page 30.)
Changing Channels
You can change channels in several ways.
Method 1
Using
CH
r
/
s
on the remote control unit or on the TV.
Method 2
Using remote control buttons
0
-
9
, • (DOT).
Examples:
To select a 1 or 2-digit channel number (e. g., Channel 5):
Press
5
ENT
.
To select a 3-digit channel number (e. g., Channel 115):
Press
1
1
5
ENT
.
To select a 4-digit channel number (e. g., Channel 22.1):
Press
2
2
•
(DOT)
1
ENT
.
Method 3
Selecting the program from Channel list.
1
Press
INPUT
on the remote control unit.
The INPUT list displays.
2
Press
c
/
d
to select "AIR" or "CABLE".
The Channel list displays.
3
Press
a
/
b
to select the desired channel, and then
press
ENTER
.
•
When selecting a 1-digit channel number, it is not
necessary to press
0
before the number.
•
When you enter
0
-
9
only, channel selection will be made if
there is no operation within a few seconds.
•
If you push "0" by itself, nothing will happen.
•
Complete the above steps within a few seconds.
•
When you enter
0
-
9
and • (DOT), channel selection will be
made if there is no operation within a few seconds.
Changing Volume
You can change the volume by pressing
VOL
k
/
l
on
the TV or on the remote control unit.
•
To increase the volume, press
VOL
k
.
•
To decrease the volume, press
VOL
l
.
20
Audio status
Output device
Output Select
Fixed
Variable
Speaker
Variable sound
Mute
•
When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below.
60
•
See page 31 for details on the Output Select function.
•
•
LC-52̲60LE925UN̲E.indb 20
LC-52̲60LE925UN̲E.indb 20
2010/07/20 18:41:14
2010/07/20 18:41:14