Sharp Aquos LC-46PX5X Operation Manual Download Page 16

Page: 16 / 56

Simple button operation for
changing volume/sound

NOTE

• Within 30 minutes after pressing

, press one of the

buttons below to cancel the mute.
—

VOL

—

•

Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing VOL

Watching TV

Mute

Changing the volume

You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press

VOL

• To decrease the volume, press

VOL

NOTE

• “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4” and “PC”

modes can store volume adjustment values separately.

Using Mute (

) on the remote control unit

mutes the current sound output.

Sleep timer

Allows you to set a time when the TV automatically
switches to standby.

Press

• The sound is silenced.
• “

” is displayed while the mute function is on.

Press

again within 30 minutes to cancel the

mute.

• Before 30 minutes, the volume level returns to the

previous setting.

Sleep Timer: Remain 2 hr. 00 min.

Still image

You can freeze a motion picture on the screen.

NOTE

• The sleep timer indicator on the TV lights up when the time

has been set.

• When the time has been set, countdown automatically

starts.

• Five minutes before the preset of time expires, the

remaining time displays each minute.

• Select “Off” by pressing

SLEEP

to cancel the sleep timer.

Press

SLEEP

• Remaining time displays when sleep timer has

been set.

Each time you press

SLEEP

, the remaining

time switches as shown below.

0 hr. 30 min.

1 hr. 00 min.

1 hr. 30 min.

2 hr. 30 min.

2 hr. 00 min.

Off

NOTE

• When this function is not available, “No still image

available.” will display.

• The still image automatically goes out after 30 minutes.

Press

FREEZE

Press

RETURN

to exit still image.

PX5X_EN.indb 15

2007-5-9 11:43:16

Summary of Contents for Aquos LC-46PX5X

























































Search results

Summary of Contents for Aquos LC-46PX5X

Reviews:

Related manuals for Aquos LC-46PX5X

Brands by name

Popular brands

Sharp Aquos LC-46PX5X, Operation Manual

Search results

Summary of Contents for Aquos LC-46PX5X

Reviews:

Related manuals for Aquos LC-46PX5X

Brands by name

Popular brands