background image

 

60

•  As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.

The  secret  number  is                

.

CLEARING THE SECRET NUMBER

If you forget the secret number, clear the secret number using the following procedure.

Select an item from the list below to display the secret number input screen. (For operating the on-screen 
display menu, see page 31.)

 

• “EZ Setup”, “CH Setup”, “Parental CTRL” or “Reset” on the Setup menu.

 

• “Color System” on the Option menu.

 

• “Software Update” on the Digital Setup menu.

Press and hold both 

CH

r

 and 

VOL

k

 on the TV simultaneously until the message appears on the screen.

PC Compatibility Chart

It is necessary to set the PC correctly to display XGA and WXGA signal. 

VGA and XGA are registered trademarks of International Business Machines Corp.

PC

31.5 kHz

31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz

640 x 480

720 x 400

VGA

800 x 600

SVGA

XGA

1024 x 768

WXGA

1360 x 768

70 Hz

60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz

O
O
O
O
O
O
O

O

O

O
O

64.0 kHz

SXGA

1280 x 1024

60 Hz

O

65.3 kHz

SXGA+

1400 x 1050

60 Hz

O

75.0 kHz

UXGA

1600 x 1200

60 Hz

O

PC

Horizontal Frequency

VESA Standard

Resolution

Vertical Frequency

Information on the Software License for This Product

■ 

Software composition

The software included in this product is comprised of various software components whose individual copyrights 
are held by SHARP or by third parties.

■ 

Software developed by SHARP and open source software

The copyrights for the software components and various relevant documents included with this product that were 
developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, 
and other relevant laws. This product also makes use of freely distributed software and software components 
whose copyrights are held by third parties. These include software components covered by a GNU General Public 
License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement.

■ 

Obtaining source code

Some of the open source software licensors require the distributor to provide the source code with the executable 
software components. GPL and LGPL include similar requirements. For information on obtaining the source code 
for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the 
following website:

http://www.sharpusa.com/gpl

We are unable to answer any questions about the source code for the open source software. The source code for 
the software components whose copyrights are held by SHARP is not distributed.

■ 

Acknowledgements

The following open source software components are included in this product:
• linux kernel/busybox/uClibc/zlib/libpng/libjpeg

LC-46BD80UN̲E.indb   60

LC-46BD80UN̲E.indb   60

2009/04/23   15:47:01

2009/04/23   15:47:01

Summary of Contents for Aquos LC 46BD80UN


































































Reviews: