Sharp Aquos LC 45D40U, Service Manual

Page: 29 / 112

29
LC-37D40U
LC-45D40U
2-8. Menu list in process A mode
Page Line Item
1 1 Main Verison Main microcomputer software version
2 BOOT version
3 Monitor Version Monitor microcomputer software version
4 EQ DATA CHECKSUM Sound parameter checksum
5 TEMPERATURE Read value of temperature sensor
6 LAMP ERROR Number of lamp error
7 NORMAL STANDBY CAUSE Reasons of standby at normal time
8 ERROR STANDBY CAUSE Reasons of standby in the event of error
2 1 INDUSTRY INIT(+Cause) Initialization to factory settings (including clearing Standby Cause data)
2 INDUSTRY INIT Initialization to factory settings
3 HOTELMODE Activate/deactivate the hotel mode
4 Center Acutime Main microcomputer operating time
5 RESET Reset main microcomputer operating time
6 Backlight Acutime Backlight lighting time
7 RESET Reset backlight lighting time
8 LAMP ERROR RESET Lamperror reset
9 VIC XPOS x-coordinate for reading image data
10 VIC YPOS y-coordinate for reading image data
11 VIC COLOR Specification of color for reading image data
12 VIC SIGNAL TYPE Specification of signal for reading image data
13 VIC READ On/Off of image data read operation
3 1 N358 ALL ADJ Auto adjustment of NTSC and TUNER signals
2 N358 MAIN ADJ Auto adjustment of NTSC signal
3 TUNER DAC ADJ Auto adjustment of TUNER
4 N358 MAIN CONTRAST NTSC contrast adjustment
5 TUNER A DAC TUNER DAC adjustment
4 1 TUNER VCHIP TEST(69CH) Execute TUNER TEST
2 TUNER VCHIP TEST(7CH)
3 TUNER VCHIP TEST(10CH)
4 TUNER VCHIP TEST(15CH)
5 1 COMP15K MAIN ADJ Auto adjustment of component 15k
2 COMP15K CONTRAST Component 15k contrast adjustment
6 1 HDTV ADJ HDTV auto adjustment
2 CONTRAST HDTV contrast adjustment
3 Cb GAIN HDTV CB gain adjustment
4 Cr GAIN HDTV CR gain adjustment
5 HDTV Y OFFSET HDTV Y offset adjustment
6 HDTV Cb OFFSET HDTV CB offset adjustment
7 HDTV Cr OFFSET HDTV CR offset adjustment