37
Use the following buttons on the remote control to
operate the menu.
A-TV (Analogue)/D-TV/RADIO buttons
Watching TV
A-TV
D-TV
RADIO
FAV.
A-TV:
Press to switch to A-TV mode. After switching from
D-TV, radio or external input mode to analogue mode,
the TV jumps to the most recently viewed analogue
channel.
D-TV:
Press to switch to D-TV mode. After switching from
analogue, radio or external input mode to D-TV mode,
the TV jumps to the most recently viewed D-TV
channel.
RADIO:
Press to switch to radio mode. After switching from
analogue, D-TV or external input mode to radio mode,
the TV jumps to the most recently tuned radio channel.
To watch the analogue TV, select “Auto
Installation” from Setup menu. (See page 18.)
After setting the channels, you can select
a channel using
CH
r
/
s
or
0 – 9
on the
remote control unit. (See page 19.)
2
1
When you watch the TV for the fi rst time
When the TV powers on for the fi rst time after
purchase, perform the auto installation.
A-TV (Analogue TV)
You can run the auto installation to set channels
automatically.
2
1
D-TV (Digital TV)
When the TV accesses to D-TV mode for the fi rst time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
To watch D-TV broadcasts, select “Auto
Search” from D-TV Menu. (See page 43.)
After setting the channels, you can select
a channel using
CH
r
/
s
or
0 – 9
on the
remote control unit. (See page 19.)
42D83M_en_f.indd 37
42D83M_en_f.indd 37
5/26/2008 1:49:51 PM
5/26/2008 1:49:51 PM
Summary of Contents for AQUOS LC-42D83M
Page 2: ...Password ...
