53
Appendix
Removing the Stand
• Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching the stand
• Before performing work, make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
• To attach the stand, perform the above steps in reverse order.
Unfasten the four screws used to secure the stand in
place.
Detach the stand from the TV. (Hold the stand so it
will not drop from the edge of the base area.)
1
2
• Detach the cable clamp on the rear of the TV when using the optional mount bracket.
• Due to the terminal confi guration on this TV, when you wall-mount this model, make sure there is enough space between the
wall and the TV for the cables.
• To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
Setting the TV on the Wall
CAUTION
LC-40LE700UN
• This TV should be mounted on the wall with both the AN-37AG2 (SHARP) wall mount bracket and the AN-37P30
(SHARP) attachment of the wall mount bracket. The TV cannot be mounted when with only the AN-37AG2 wall
mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause
serious injuries.
LC-46LE700UN/LC-52LE700UN
• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other
wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualifi ed service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualifi ed service professional about using an optional AN-37AG2 or AN-52AG4 bracket to mount the
TV on the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-37AG2 or AN-52AG4 wall mount bracket.
(See the bracket instructions for details.)
About setting the TV angle
Vertical mounting
Angular mounting
0/5/10/15/20°
AN-37AG2 + AN-37P30
LC-40LE700UN
• The center of the display:
1
9
/
64
inches (29.05 mm) under the “B” position.
AN-52AG4
LC-46LE700UN
• The center of the display:
1
/
16
inch (1.2 mm) under the “b” position.
LC-52LE700UN
• The center of the display:
5
/
64
inch (1.75 mm) under the “b” position.
• Refer to the operation manual of
AN-37AG2/AN-37P30 or AN-52AG4 for details.
LC-52̲46̲40LE700UN̲E.indb 53
LC-52̲46̲40LE700UN̲E.indb 53
2009/06/09 11:40:04
2009/06/09 11:40:04
Summary of Contents for AQUOS LC-40LE700UN
Page 2: ......
