Watching TV
Selecting audio language
E
DTV/CADTV/SAT mode:
Each time you press
2
the audio language switches
between audio sources available.
NOTE
•
Selectable languages vary depending on the received
broadcasts.
E
ATV mode:
Each time you press
2
, the mode switches as shown
in the following tables.
NICAM TV broadcasts selection
Signal
Selectable items
Stereo
NICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM CH AB, MONO
Monaural
NICAM MONO, MONO
A2 TV broadcasts selection
Signal
Selectable items
Stereo
STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monaural
MONO
NOTE
•
When no signal is received, the audio mode will display
“MONO”.
E
DTV/CADTV/SAT mode:
Press
[
button to enable/disable the subtitles.
To see how to change between different languages go
to
Control settings
on page 24.
E
ATV mode:
The available subtitles according to the broadcasting
will be enabled or disabled by pressing
[
button.
Daily operation
Switching on/off
Press
a
on the TV to switch it on.
Switch it off by pressing
a
on the TV.
Switching between digital, satellite
and analogue broadcasts
Changing channels
With 0–9:
With P
r
/
s
:
Selecting an external video source
Once the connection is made, press
b
to display
the
“AV selection”
screen, and then press
c
/
d
to
switch over to the appropriate external source with
OK
.
Subtitles
Turning on/off the power
Standby mode
17
NOTE
• When turning off the power
using
a
on the TV, EPG
data will be lost.
• The terminal layout may differ
depending on the model.
E
Switching to standby mode
If the TV is switched on (BLUE LED), you can switch it
to standby by pressing
a
on the remote control unit.
E
Switching on from standby
From standby (RED LED), press
a
on the remote
control unit.
TV indicator status
LED indicator
Status
Off
Power off
Blue
Power on
Red
Standby
Violet
StandBy with USB REC programmed
NOTE
•
If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
•
A small amount of electric power is still consumed even
when
a
is turned off.
E
Switching off the TV and connected
additional devices
By long pressing on
a
the TV and all CEC capable
devices connected to the HDMI interfaces switch to
standby mode. See page 44 for more information.
P
r
s
E
Press
“ATV/DTV”
or
“RADIO”
to change
between modes.
