Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
1
Press
a
on the TV.
• The initial auto installation wizard appears.
• The auto installation can also be called in the TV menu,
see
Repeat initial installation
on page 40.
• The routine of the first installation wizard depends on
the selected settings.
2
Setting the menu language.
Press
a
/
b
/
c
/
d
to select the desired language.
Proceed with
J
button.
3
Setting
Energy Efficiency.
Decide how efficiently you want to operate your TV
set.
•
Home Mode
:
The emphasis for home use is on low energy
consumption.
•
Shop Mode:
The picture settings are aligned to operate in the
presentation room. If the ambient brightness diminishes,
the energy consumption is not reduced.
This setting can be changed later in the
MENU
Extras
→
Energy Efficiency.
Proceed with
J
button.
4
Selecting the TV location.
Press
▲
/
▼
/
◄
/
►
to select your country or area.
• This setting screen only appears during the initial auto
installation.
Proceed with
J
button.
Quick guide
5
Select broadcast settings.
Press
▲
/
▼
to move between different tune type.
Press
OK
to select the desired antenna.
Cable analogue:
analogue broadcast via cable/
antenna.
DVB-T:
Digital broadcast.
DVB-C:
Cable digital broadcast.
DVB-S:
Satellite broadcast. (Only 752/754 series)
Proceed with
J
button.
6
Select subtitles and audio languages.
Press
a
/
b
/
c
/
d
and
OK
to select the desired
languages and alternative languages for subtitles
and audio for DVB programmes.
Proceed with
J
button.
•
To set up audio commentary for the visually impaired, please
see
Audio commentary
on page 25.
If you have not selected DVB-T antenna in the antenna
selection, continue with
Setting options for DVB-C
reception
on page 10.
7
Selecting tuner settings.
●
●
Scrambled stations
You can specify if coded stations are to be searched
for in the search/update.
Select
yes
to save all scrambled stations.
•
These stations can only be received in connection with a CI
module and the appropriate CA Card.
•
If a CI module with a CA Card is already inserted for the station
search, all the stations which this module can descramble are
also saved when
no
is selected.
●
●
Search method
Select
Frequency search
if you want to run the
station search independently of the channel grid.
●
Accept logical channel number
In various countries, digital stations are transmitted
with a preset channel number per station, known as
"Logical Channel Numbers" (LCN).
If you select
yes
, these default channel numbers will
be used and the channels will be sorted as per LCN.
9
Confirm the following before turning
on the power
E
Is the antenna cable connected?
E
Is the AC cord plugged in?
Setting options for DVB-T reception
(Only 652/654 series
)
