Sharp AQUOS LC-37AD5E Service Manual Download Page 61

Page: 61 / 142

LC-37AD5E

5 – 2

7) Pre-programmed HDCP keys provide highest level of key security, simplifies manufacturing.

1.7. IC301/302 (VHiTDA8931T-1Y)

The TDA8931 is a switching power stage for high efficiency class-D audio power amplifier systems.

With this amplifier a compact 1x 20 W closed loop self-oscillating digital amplifier system can be built.

The audio output of LC-37AD5E are set to 10W, respectively.

1.8. IC4203 (RH-IXC100WJZZQ)

This IC is a high performance CMOS super technology 16Mbit Flash Memory.

Start software (loader) for the CPU with a built-in digital processor and application software have been written on this Flash Memory.

The digital processor reads these soft wares on start-up and implements them.

1.9. IC4201/4202 (RH-iXB742WJZZQ)

This IC is 64Mb SDRAM (static dynamic random-access memory) IC.

In this equipment, it is used for SMI memory (for image processing), and data is used for operation of the digital processor.

1.10. IC4001 (RH-IXB680WJZZQ)

This is a video/ audio signal processing IC (Digital Processor) (STi5516) for digital tuner, which has been manufactured by ST Microelectronics, and
incorporates a CPU.

In this equipment, it implements GUI processing and video/audio processing for digital tuner, negotiation processing with CI-CARD, etc.

Summary of Contents for AQUOS LC-37AD5E















































































































































Search results

Summary of Contents for AQUOS LC-37AD5E

Reviews:

Related manuals for AQUOS LC-37AD5E

Brands by name

Popular brands

Sharp AQUOS LC-37AD5E, Service Manual

Search results

Summary of Contents for AQUOS LC-37AD5E

Reviews:

Related manuals for AQUOS LC-37AD5E

Brands by name

Popular brands