Sharp AQUOS LC-37AD1E Operation Manual Download Page 90

Page: 90 / 101

Useful features (Analogue)

Time display

You can display the time information included in the
Teletext. Follow the steps below to display the time.

Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)

Press

. The channel display will appear

on the Display.

Press

again within the three-second

interval the channel display is on the screen.
Time information will display on the lower left
of the screen for about three seconds.

Even when you change the TV channel, you
can display the time information with steps
2 – 3 above.

NOTE

• The time is not captured when a selected channel has no

Teletext information.

NOTE

• The time display cannot be stored once the power is

turned off. When you turn on the power, perform steps 1 –
4 again.

NOTE

• If receiving a digital broadcast, you can only display the

time by performing steps 2 and 3 below.

LC-37AD1E(E)-j

03.12.2, 1:34 PM

Summary of Contents for AQUOS LC-37AD1E






































































































Search results

Summary of Contents for AQUOS LC-37AD1E

Reviews:

Related manuals for AQUOS LC-37AD1E

Brands by name

Popular brands

Sharp AQUOS LC-37AD1E, Operation Manual

Search results

Summary of Contents for AQUOS LC-37AD1E

Reviews:

Related manuals for AQUOS LC-37AD1E

Brands by name

Popular brands