LC
-
32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
5 – 2
2. Entering and exiting the adjustment process mode
1. Unplug the AC power cord of running TV set to force off the power.
2. While holding down the “VOL (-)” and “INPUT” keys on the set at once, plug in the AC power cord to turn on the power.
The letter “K” appears on the screen.
3. Next, hold down the “VOL (-)” and “P (
)” keys on the set at once.
Multiple lines of blue characters appearing on the screen indicate that the set is now in the adjustment Process mode.
If you fail to enter the adjustment process mode (the display is the same as normal startup), retry the procedure.
4. To exit the adjustment process mode after the adjustment is done, unplug the AC power cord to force off the power.
(When the power is turned off with the remote controller, once unplug the AC power cord and plug it in again.
In this case, wait 10 seconds or so before plugging.)
3. Remote controller key operation and description of display in adjustment process mode
1) Key operation
*Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
4. Description of display
CAUTION:
Use due care in handling the information described here lest the users should know how to enter the adjustment process mode.
If the settings are tampered with in this mode, unrecoverable system damage may result.
Remote controller key
Main unit key
Function
P (
/
)
P (
/
)
Moving an item (line) by one (UP/DOWN)
VOL (+/–)
VOL (+/–)
Changing a selected item setting (+1/ –1)
Cursor (
/
)
—————
Turing a page (PREVIOUS/NEXT)
Cursor (</>)
—————
Changing a selected line setting (+10/ –10)
INPUT
INPUT
Input source switching (toggle switching) (TV
→
EXT1~9)
OK
—————
Executing a function
RETURN
—————
Returning to a present page
No.
Description
Display specification
(1)
Present page/number of total pages
2char/2char Decimal Number mark.
(2)
Input that has been selected now
TUNER/DTV/INPUT1/INPUT2/INPUT3/INPUT5/INPUT6/INPUT7/INPUT8/INPUT9
(3)
Present colour system
AUTO/NTSC/PAL/SECAM/COMP15K/COMP33K/COMP45K/COMP28K/COMP31K
(4)
Inducing display
EUROPE/RUSSIA/SWEDEN
(5)
Inch setting and Model name display
Inch setting and Model name display (Example:46LE700(A))
(6)
Item name
Max. 30 char
(7)
Parameter
Max. 60 char
(1) Present
㵘
page / number of total pages
(5) Inducing display
(3) Present colour system
(2) Input that has been selected now
(6) Inch setting and Model name display
1/17
INPUT1
AUTO
EURO
xxxxx
MAIN Version
1.00 (E 2009/**/** )
BOOT Version
XX
Monitor Version
XX
T-CON /H.264Version
XX
CPLD Version
XX
LED T-CON Version
XX
EQ DATA CHECKSUM
ROM
LAMP ERROR
0
MONITOR ERR CAUSE
11 11 11 11
NORMAL STANDBY CAUSE
0
ERROR STANDBY CAUSE
0 0 0 0 0
(6) Item name
(7) Parameter
