Sharp Aquos LC-32LE345X, Operation Manual

Page: 13 / 32

11
SOUND menu (Continued)
H
Surround
When you set to “On”, you can enjoy surround
sound, the same as if you were in a movie theatre.
Selected item Description
On Makes it possible to enjoy natural,
realistic surround sound.
Off Outputs the normal sound.
TIME menu
TIME
Clock
Time Zone
Sleep Timer
No Operation Off
No Signal Off
01/Jan 09:20
GMT +8
Off
30 min.
Enable
H
Clock
Display date and clock time.
H
Time Zone
This function enables you to select your local time
zone.
NOTE
• This function lets you select the right time zone in case the
time displayed in the EPG does not match the local time
of your area.
H
Sleep Timer
This function is conveniently used when, for instance,
going to bed while watching TV.
(Off, 10min, 20min, 30min, 60min, 90min, 120min,
180min, 240min)
NOTE
• When the time has been set, countdown automatically
starts.
• Select “Off” to cancel the Sleep Timer.
• You can also select “Sleep Timer” by pressing
SLEEP .
H
No Operation Off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30 min, 3 hours, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
H
No Signal Off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• If the input source is PC, the TV will automatically power
off in about 5 minutes after the TV goes into a state of
receiving no signal.
• When a TV programme fi nishes, and the TV receives
signal input, this function may not operate.
LOCK menu
LOCK
Lock System
Set Password
Block Programme
Parental Guidance Off
NO BLOCK
H
Lock System (ATV and DTV input mode only)
You can block the viewing of any selected channel
(On, Off).
Password must be set fi rst to allow “Lock System”
to function.
1
Press MENU and the MENU screen
displays.
2
Press
c
/
d
to select “ ” (LOCK).
3 Press
a
/
b
to select “Lock System”, and
then press ENTER .
4
If you already set the password, enter it here.
5 Press
c
/
d
to select “On” or “Off”, and then
press
ENTER
.
NOTE
• See “Set Password” for setting a password.
• If “Lock System” is set to “On” for a channel, “Please enter
password” is displayed when you select the channel, and
the image and sound of the channel is blocked.
H
Set Password
Allows you to use a password to protect certain
settings from being accidentally changed.
1 Repeat steps 1 and 2 in Lock System .
2
Press
a
/
b
to select “Set Password”, and
then press ENTER .
3 Enter the old 4-digit number as a password
using
0 — 9 , and then enter the new 4-digit
number as a password.
4
Enter the same 4-digit number in step 3 to
confi rm.
LC32LE345X_EN with En Star.indd 11 LC32LE345X_EN with En Star.indd 11 4/20/2012 4:58:47 PM 4/20/2012 4:58:47 PM