Sharp Aquos LC-32GP1U Page 19 Operation Manual Download

Page: 19 / 62

Simple operations for watching a TV program

POWER

indicator

TV POWER

(On/Standby)

Turning on the power

Press

POWER

on the TV, or

TV POWER

on the

remote control unit.

• POWER indicator (Green): The TV is on. (After a few

seconds, a window appears with sound.)

NOTE

• The initial setup starts when the TV powers on for the ﬁ rst

time. If the TV has been turned on before, the EZ Setup will
not be invoked. See page 24 for performing EZ Setup from
the Setup menu.

Turning off the power

Press

POWER

on the TV, or

TV POWER

on the

remote control unit.

• The TV enters standby and the image on the screen

disappears.

• The POWER indicator on the TV turns off.

NOTE

• If you are not going to use this TV for a long period of time,

be sure to remove the AC cord from the AC outlet.

• Weak electric power is still consumed even when

POWER

is turned off.

Watching TV

POWER

TV status indicator (POWER)

Lighting (Green)

Lights off

Standby

“Off” is selected in OPC setting

“On” or “On: Display” is selected in OPC setting

Lights off

Lighting (Green)

TV status indicator (OPC)

• See page 27 for details.

OPC

indicator

SLEEP

indicator

“Off” is selected in SLEEP setting

“30”, “60”, “90” or “120” is selected in SLEEP setting

Lights off

Lighting (Red)

TV status indicator (SLEEP)

• See page 36 for details.

Summary of Contents for Aquos LC-32GP1U































































Search results

Summary of Contents for Aquos LC-32GP1U

Reviews:

Related manuals for Aquos LC-32GP1U

Brands by name

Popular brands

Sharp Aquos LC-32GP1U, Operation Manual

Search results

Summary of Contents for Aquos LC-32GP1U

Reviews:

Related manuals for Aquos LC-32GP1U

Brands by name

Popular brands