Sharp Aquos LC-32GP1U Operation Manual Download Page 48

Page: 48 / 62

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

PG-13

NC-17

NONE

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

TV-G

TV-PG

TV-14

TV-MA

NONE

TV-Y7

TV-Y

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

TV-G

TV-PG

TV-14

TV-MA

NONE

TV-Y7

TV-Y

V-Chip

V-Chip (DTV Only)

Secret No.

Status

Example

• If Status is not set to “On”, the conﬁ guration

settings will not work. (See page 43.)

Input the 4-digit secret number by using

–

Press

to adjust the item to your desired

position. “ ” indicates the item is blocked.

Press

RETURN

• The setting automatically enters “Block” for any

ratings below your selection.

• If Status is not set to “On”, the conﬁ guration

settings will not work. (See page 43.)

Press

to select “Parental CTRL”, and

then press

ENTER

• The secret number setting menu displays only

when “Secret No.” is set. (See page 43.)

• “V-Chip” and “Status” will not be selectable from

the menu if you do not ﬁ rst conﬁ gure your secret
number. (See page 43.)

Press

to select “V-Chip”, and then press

ENTER

Press

to select “MPAA”, and then press

ENTER

When setting an individual content-based
rating item, do as follows:

Press

ENTER

to access blocked

content items from the currently selected
age-based rating item.

Press

to select an individual item,

and then press

ENTER

to unblock it (“ ”

is removed). Repeat the same steps for the
other items.

Press

RETURN

to register after all

individual content rating items are set.

TV Parental Guidelines (TV Guidelines)

Repeat steps 1 to 4 in

Voluntary movie

rating system (MPAA)

Press

to select “TV Guidelines”, and

then press

ENTER

Press

to adjust the item to your desired

position. “ ” indicates the item is blocked.

• The setting automatically enters “Block” for any

ratings below your selection.

Voluntary movie rating system (MPAA)

Press

to display the MENU screen, and

then press

to select “Setup”.

Useful adjustment settings

Example

Press

to exit.

Press

to exit.

Example

Summary of Contents for Aquos LC-32GP1U































































Search results

Summary of Contents for Aquos LC-32GP1U

Reviews:

Sharp Aquos LC-32GP1U, Operation Manual, Page: 48 / 62

Search results

Summary of Contents for Aquos LC-32GP1U

Reviews: