LC32D44E/S/RU-BK/GY (1st Eddition)
5 – 2
2. IC1301 (VHINJM2750M-1Y)
The NJM2750 is a 4-input/1-output stereo audio selector. It contains a switch operational amplifier and shows lower noise, lower distortion and higher
channel separation than an ordinary multiplexer or analog switch.
Description:
•
Operating voltage (4.7 - 13V)
•
4-input/1-output audio selector
•
Stereo 2-channel
•
Low output noise (-110dBV typ.)
•
Low distortion (0.005% typ.)
3. IC1401 (VHISM5309AV-1Y)
The SM5309A is a 3ch video buffer with a built-in 5th-order low pass filter. The cutoff frequency of the low pass filter can be adjusted between 4MHz
and 40MHz in 256 steps. The low pass filter supports analog inputs/outputs of video signal device of 480i to 1080i format. When it is used as an input
system, it functions as an antialiasing filter of the rear-stage ADC system. If used as an output system, aliasing noise from the video DAC or exoge-
nous noise is eliminated, and the terminating resistance of up to 300
Ω
can be driven. The cutoff frequency or signal input method can be controlled by
I2C-BUS.
Description:
•
Supply voltage: Analog: 4.75 - 5.25V
Digital: 3.0 - 5.5V
•
Low pass filter function where cutoff frequency can be adjusted in 256 steps
Cutoff frequency range: 4MHz - 40MHz (RISET = 1.8k
Ω
)
•
Filter bypath mode function supporting the resolution of SXGA
•
Switchable to the half fc mode suitable for the component signal (CH-2, CH-3)
•
2-input multiplexer function (switchable by the I2C-BUS or MUXSEL terminal)
•
For the video input terminal, the sync-tip clamp/bias/direct input can be selected per channel.
•
Possible to drive the terminating resistance of up to 300
Ω
•
Output gain: 0dB
•
Power down function
– Consumption current at power down: 1mA or less
•
Control by I2C-BUS interface
– Transfer rate: First mode (400kbit/s) supported
26
CS1
I
Chip select MSB
Power supply
19, 24, 31, 38, 45, 51, 55, 62
VDD_1V0
---
Digital core supply (1.0 V)
22, 28, 34, 41, 50, 56, 63
VDD_3V3
---
Digital I/O supply (3.3 V)
Pin No.
Pin Name
I/O
Pin Function
1
IN1a
I
A-ch input selector 1.
2
CNT1
I
control 1.
3
IN2a
I
A-ch input selector 2.
4
CNT2
I
control 2.
5
IN4a
I
A-ch input selector 4.
6
IN1b
I
B-ch input selector 1.
7
IN2b
I
B-ch input selector 2.
8
IN4b
I
B-ch input selector 4.
9
IN3b
I
B-ch input selector 3.
10
(N.C)
---
No connection.
11
OUTb
O
B-ch output.
12
Vref
I
Reference voltage.
13
IN3a
I
Ach input selector 3.
14
V+
---
Power supply.
15
OUTa
O
A-ch output.
16
GND
---
Ground.
Pin No.
Pin Name
I/O
Pin Function
1
IN1A
I
Video signal input terminal (CH-1, A input)
2
IN1B
I
Video signal input terminal (CH-1, B input)
3
GND
---
Ground.
4
ISET
---
Resister (RISET) connection terminal for internal current setting.
Pin No.
Pin Name
I/O
Pin Function
Summary of Contents for Aquos LC-32D44E
