24
LC-26GA5E
LC-32GA5E
LC-26GA6E/LC-26BV6E
LC-32GA6E/LC-32BV6E
LC-37GA6E
Press END button to return to the previous menu.
Use the up / down arrows to select a term in the
menu.
Confi rm the selection with
OK.
Using the up / down arrows the values are
changed.
LCD Cont Menu
Panel control (QS board adjustments).
BRI CTR OUT
CONTRAST
255
BRIGHTNESS
255
GA6 VX.XX
ExpX
PxW Exp X.X LCD VXX
GAMMA CONST
RED
000
GREEN
000
BLUE
000
ACTIVATE
OFF
SOURCE
0
COPY LOW
OFF
COPY
HIGH
OFF
GA6 VX.XX
ExpX
PxW Exp X.X LCD VXX
Press END button to return to the previous menu.
Use the up / down arrows to select a term in the
menu.
Confi rm the selection with
OK.
Use the up / down arrows to change values.
Use the left / right arrows to change between pa-
rameters.
Use the up / down arrows to select a term in the
menu.
Confi rm the selection with
OK.
Use the up / down arrows to change values.
Use the left / right arrows to change between pa-
rameters.
Press END button to return to the previous menu.
GAMMA CONST Menu (White Balance Adjustment)
Fine and manual adjustment of gamma with patterns done defi ning the values of R, G, B.
ACTIVATE:
It activates the pattern previously selected.
SOURCE:
Choose between 0(TV), 1(PC) or 2(HD).
COPY LOW:
Saves in NVM the adjusting point of gamma. (Black pattern: 20% of white)
COPY HIGH:
Saves in NVM the adjusting point of gamma. (White pattern: 80% of white)
Adjust:
- In order to obtain a pattern with a 20% of white, set to 63 the values of RGB.
- Choose ACTIVATE option and press OK.
- Measure with the colorimeter the white intensity of pattern.
- Press again OK key to return GAMMA CONST Menu.
- Change red or blue to obtained the 20% of white temperature. (Green must be the reference value, so do not
change)
- Finally, already obtained the correct value, save 20% of white with “COPY LOW”.
- Change the source to 1 (PC) and press “COPY LOW” again, change source to 2(HD) and press “COPY LOW”
once more.
Thereby, the same colour temperature is copied at all the sources.
- To obtain a pattern with 80% of white, set to 200 the RGB values and repeat the process before described
pressing fi nally, “COPY HIGH” instead “COPY LOW”.
GA6 VX.XX
ExpX
PxW Exp X.X LCD VXX
LCD CONT
FREQ
0
CLR
MODE
OFF
PATTERN1
00
PATTERN2
0
COMBIAS
190
IC CONT
SOFT VER.
XXX
www.ma163.com 电子技术资料网