Sharp Aquos LC-20E1E, Service Manual

Page: 7 / 76

7
LC-20E1E
REMOVING OF MAJOR PARTS
1. Remove the table stand fixing screws (4 pcs.).
2. Remove the two terminal covers.
3. Remove the terminal section fixing screws (2 pcs.).
4. Remove the cabinet B fixing screws (10 pcs.).
5. Remove the cabinet B after opening from the direction of an arrow.
6. Peel off the tape. Remove the reinforcement angle fixing screws (4 pcs.).
7. Remove the top cover fixing screws (2 pcs.).
8. Remove the operation PWB fixing screws (2 pcs.).
9. Peel off the tape.
10. Detach the connector from each PWB.
3
4
4
4
2
2
5
1
Cabinet A
Cabinet B
Stand
Terminal
Cover (S)
Terminal
Cover (L)
P6705 P6705
SC1201 SC1202 SC1202 SC1202
P4004 P4004 P4004
SC1203 SC1203
P3702
P2003
P6706 P6706
P6705
SC1203
SC2001 SC2001 SC2001
SC3100
P1903 P1903 SC1602 SC1602 P1903 SC1602
P6706
P3603 P3301 P3302 P3602
0
0
0
0
0
0
0
0
0
0
0
0
0
6
P3601 P3601 P3601
7
8
Reinforcement
Angle
Tape
Inverter-A
PWB
Inverter-B
PWB
R/C, LED PWB
Operation PWB
Main PWB Main PWB
Tuner PWB
Main PWB
6
Tape
9
0
P3604 P3604 P3604
SC2002