20
Connecting HDMI equipment
You can use the INPUT4 terminal when connecting HDMI equipment.
HDMI cable
(Commercially
available)
Using external equipment
HDMI
equipment
When using an HDMI-DVI conversion cable, use INPUT4 and AUDIO terminal.
SOURCE SELECTION
0. TV
1. INPUT1
2. INPUT2
3. INPUT3
4. INPUT4
5. INPUT5
[0-5]:SELECT
1
NOTE
• Refer to your external equipment operation manual for
the signal type.
To watch an HDMI equipment image, select
“INPUT4” from “SOURCE SELECTION”
menu using
INPUT
on the remote control
unit or on the TV. (See page 19.)
Displaying an image from HDMI
equipment
1
2
4
3
5
Press / to select “HDMI” or “DVI”.
Press
TV MENU
and the MENU screen
displays.
Press / to select
(AUDIO).
Press / to select “HDMI”.
HDMI:
When you connect the HDMI device to
the TV, select this setting.
DVI:
When you connect the DVI device to the
TV with analog audio cords, select this
setting.
Press
EXIT
to return to the normal screen.
Selecting HDMI audio input source
AUDIO
MTS
STEREO
BASS
25
TREBLE 25
BALANCE
0
SURROUND OFF
HDMI
HDMI
/DVI
RESET
►
:SELECT
:ADJUST
To coaxial digital input of
external audio devices
Coaxial digital cable
Using digital audio output
It is possible to output audio through the COAXIAL
DIGITAL AUDIO OUTPUT terminal in DVD mode
only. PCM audio outputs from the terminal.
NOTE
• Even when the TV is not in DVD mode, the audio may be
output through the COAXIAL DIGITAL AUDIO OUTPUT
terminal depending on the DVDs.
5X20431A_E_.indb 20
5X20431A_E_.indb 20
5/19/2006 6:35:38 PM
5/19/2006 6:35:38 PM