17
WIDE MODE
You can select the picture size. Selectable picture size
varies with the type of signal received.
Normal:
For 4:3 “standard” pictures. A side bar appears
on each side.
Zoom 14:9:
For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may see bars on the
top and bottom with some programmes.
Panorama:
In this mode the picture is progressively
stretched toward each side of the screen.
Full:
For 16:9 squeeze pictures.
Cinema 16:9:
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Cinema 14:9:
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Full:
Display with the Overscan image. Crop all sides of
screen.
Useful features
WIDE MODE
You can select the picture size.
1
Press
f
.
• The WIDE MODE menu displays.
2
Press
f
or
a
/
b
to select a desired item on the
menu.
NOTE
• Can also be adjustable when the HDMI-PC input (see
page 1) is selected.
• Connect the PC before making adjustments. (See page
9.)
• Selectable picture size may vary with input signal type.
Normal:
Keeps the original aspect ratio by filling the
screen up to the top and bottom.
Full:
An image fully fills the screen.
Dot by Dot:
Detects the resolution of the signal and
displays an image with the same number of pixels on
the screen.
TV/DTV/AV only
PC only
4:3 Mode set to “Normal”
NOTE
• If the signal contains no WSS information, Auto Selection
will not function even when the WSS option is enabled.
4:3 Mode set to “Panorama”
●
Manual Selection
1
Press
f
.
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
2
Press
f
or
a
/
b
while the WIDE MODE menu
displays on the screen.
• As you toggle down the options, each is immediately
reflected on the screen. No need to press
OK
.
●
Auto Selection
If you set WSS and 4:3 Mode in the Setup menu on
page 15, the optimum WIDE MODE is automatically
chosen for every broadcast, VCR or DVD containing
the WSS information.
●
WSS menu
To enable Auto Selection, set WSS in the Setup menu
to “On”. (See page 15.)
●
4:3 Mode menu
To set the type of the wide screen, select “Normal” or
“Panorama” in the 4:3 Mode menu. (See page 15.)
Freezing the image while watching
Allows you to capture and freeze one frame from a
moving image that you are watching.
1
Press
Z
.
• Captures one frame from a moving image.
2
Press
Z
again (or press
RETURN
)
to cancel the
function.
NOTE
• The still image automatically goes out after 30 minutes.
Using the analogue programme list
You can also select the desired channel from
programme list instead of using
0
–
9
numeric buttons
or
P
(
r
r
r
r
r
/
s
s
s
s
s
)
.
1
Press
OK
when no other menu screen is
displayed. (Except when an external input source
is selected.)
2
Press
a
/
b
to select the desired channel to tune
in, and then press
OK
.
Item (for SD (Standard-Definition) signal)
Item (for HD (High-Definition) signal)
Item
