Sharp Aquos AN-ACS1U Operation Manual Download Page 8

Page: 8 / 36

Remote control (x1)

Page 10

“AA” size battery (x2)

HDMI cable (x1)

Please confi rm that the following accessories are included.

Accessories

Page 17

Pages 14-15

Page 11

Page 30

Page 12

Optical digital cable (x1)

Top glass cover (x1)

Glass shelf (x1)

Wall spacer (x2)

Cloth (x1)

Cable clamp (x5)

(UM/SUM-3, R6, HP-7 or similar)

Operation manual (×1)

NOTE

• Only the above accessories are included.
• The top glass cover, glass shelf, wall spacers and other parts must be installed before use. (Pages 11-12)

Trademarks

•

“

HDMI”, the HDMI logo and High-Defi nition Multimedia Interface are trademark or registered trademarks of HDMI Licensing

LLC.

•

Manufactured under license from Dolby Laboratories.

“

Dolby”, “Pro Logic”, the double-D symbol, Audistry and the sound

shell logo are trademarks of Dolby Laboratories.

•

“

DTS” and

“

DTS Digital Surround” are registered trademarks of DTS, Inc.

AN-ACS1U̲en.indb 6

2008/01/07 18:06:30

Summary of Contents for Aquos AN-ACS1U





































Search results

Summary of Contents for Aquos AN-ACS1U

Reviews:

Related manuals for Aquos AN-ACS1U

Brands by name

Popular brands

Sharp Aquos AN-ACS1U, Operation Manual

Search results

Summary of Contents for Aquos AN-ACS1U

Reviews:

Related manuals for Aquos AN-ACS1U

Brands by name

Popular brands