8
Controls and indicators
Control part
Remote sensor
• Point the remote control at
this sensor.
Power indicator
• Lit in green: unit is operating
• Lit in red: unit is in stand-by mode
POWER
• Switches the unit between on and off (stand-by).
INPUT
• Press this button to select the input source. Each
push of the button cycles through the following
settings.
/-
• Turns up/down the volume.
HDMI1 (INPUT)
HDMI2 (INPUT)
AUX1
AUX2
AUX4
AUX3
AUDIO INPUT
(ANALOG)
DIGITAL
AUDIO INPUT
(OPTICAL)
Display top row (Input source)
• Shows the currently selected input source.
Display bottom row (Volume/sound mode)
• Shows information about sound mode, volume level, Dolby Virtual
Speaker, Audistry, and other settings.
• Shows the input signal type.
• Lights up when Dolby ProLogic II is active.
• Lights up when Dolby Virtual Speaker mode
is active.
• Lights up when Audistry mode is active.
,
,
Page 16
Page 17
Page 19
Page 23
Page 22
Page 20
Page 20
Page 19
Pages 16•19
Pages 18-23
Page 18
Depending on the input signal type and selected settings, one or
more of the following indicators lights up.
……SOUND SPACE
……NATURAL BASS
……INTELLIGENT VOLUME
……MONO TO STEREO
Display part
Various information about the operating condition of the unit is shown here, including the input source, volume level setting,
sound mode, subwoofer level setting, mute, etc.
AN-ACS1U̲en.indb 8
AN-ACS1U̲en.indb 8
2008/01/07 18:06:32
2008/01/07 18:06:32
