Sharp AN-52AG1, Operation Manual

Page: 31 / 88

E-13
ENGLISH
+5
-5
0
0
+5
-5
Installing the LCD color TV on the wall
Install the main bracket unit attached to the LCD color TV to the
based bracket.
The protruding pins of the main bracket unit catch on the slots on both sides of the wall-
mount bracket.
At this time, fit the pins at the upper most position on the sides of the main bracket unit into
the slots that match the wall-mount bracket connection lever marks (color marks) set to that
height in the procedure on the previous page.
Use the screws to fasten the main bracket unit and the wall-mount
bracket connection levers. (Be sure to do this.)
2
*To change the angle from the currently set angle position, refer to the explanation on page 8
“Adjusting the Angle of Bracket Unit A” before conducting the assembly work.
*When setting it to the vertical (0°) position, use all 4 of the screws removed in accordance
with the instructions on page 7 “Adjusting the Angle of Bracket Unit A.”
• Be sure to use at least 2 people when installing the LCD color TV to the based bracket.
• Be sure to perform Steps 1 and 2 below. Only performing Step 1 could result in the display
falling and injuring someone.
Caution
1
(Green)
(Blue)
(Yellow)
Check the protruding pin slots.
Wall
LCD television