18
3
Scanning
3
SCANNING
SCANNING AN IMAGE
Before you can scan images using the AL-841 from a TWAIN-compatible application, you must
install the supplied SHARP TWAIN interface software. This software is automatically installed at
the same time you install the SHARP printer driver provided on CD-ROM. See INSTALLING
THE PRINTER DRIVER SOFTWARE on page 5.
●
Be sure to read “Readme” in the driver group before scanning images from
application programs.
●
When using the AL-841 as a scanner, you must make sure that your computer
Printer Port is configured for ECP mode. If the computer is set to a mode
other than ECP mode, change the mode to ECP mode. The method for setting
ECP mode differs depending on your computer. Refer to the documentation
for your computer.
●
Refer to the TWAIN help for more information.
●
For information about the state of operation panel indicators when using the
scanner function, see Indicators on the operation panel on page 13.
●
Preheat mode and auto power shut-off mode will be canceled when scanning
is started.
Summary of Contents for AL-841
Page 32: ......
