manualshive.com logo in svg

Sharp AL-2021, Operation Manual, Page: 85 / 91

Share
Download
Sharp AL-2021 Operation Manual Download Page 85

9

85

B: Misfeed in the fusing area

1

Lower the fusing unit release 
lever.

2

Gently remove the misfed paper 
from under the fusing unit as 
shown in the illustration. If the 
paper cannot be removed, proceed 
to "C: Misfeed in the transport 
area".

3

Raise the fusing unit release lever and then close the side 
cover by pressing the round projections near the side cover 
open button. The misfeed (

) indicator will go out and the start 

(

) indicator will light up.

The fusing unit is hot. Do not 
touch the fusing unit when 
removing misfed paper. Doing 
so may cause a burn or other 
injury.

• Do not touch the surface (green portion) of the drum cartridge 

when removing the misfed paper. Doing so may cause 
smudges on copies.

• Do not remove the misfed paper from above the fusing unit. 

Unfixed toner on the paper may stain the paper transport 
area, resulting in smudges on copies.

F

u

sing 

u

nit release le

v

er

Summary of Contents for AL-2021




























































































Reviews:

No comments