ENGLISH
EN-8
SUPER JET OPERATION
The air conditioner works at the maximum
power and optimum louver direction to
make the room cool rapidly.
1
During operation, press the SUPER
JET button.
• The remote control will display “ ”.
• The temperature display will go off.
• The vertical air
fl
ow louver will be set
obliquely downward.
• The lighting bar will turn to blue.
(For XP10/13UXD, XP10/15UF models only)
TO CANCEL
Press the SUPER JET button again.
• The vertical air
fl
ow louver will return to the
original direction.
NOTE:
• The air conditioner will operate at “Extra
cooling power” and “Extra HIGH” fan speed
for 15 minutes, then shift to “HIGH” fan speed.
• You can not set the temperature or fan speed
during the SUPER JET operation.
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform PLASMACLUSTER operation in
FAN only mode, press the PLASMACLUS-
TER button when the unit is not operating.
The lighting bar will turn to cool white
(For
XP10/13UXD, XP10/15UF models only)
.
The mode symbol of the remote control will
go off and the fan speed cannot be set to
AUTO.
(For Premium models only)
Plasmacluster ions released into the room
will reduce some airborne mold.
1
During operation, press the PLAS-
MACLUSTER button.
• The remote control will display “ ”.
• The blue PLASMACLUSTER lamp ( )
will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The blue PLASMACLUSTER lamp ( )
will turn off.
1
SENSOR
PLASMACLUSTER OPERATION
1
SENSOR
TINSEB026JBRZ.indb EN-8
TINSEB026JBRZ.indb EN-8
4/28/2560 BE 2:49 PM
4/28/2560 BE 2:49 PM
