background image

EN-1

ENGLISH

WARNING

 Do not pull or deform the power supply cord. 

Pulling and misuse of the power supply cord 
can result in damage to the unit and cause 
electrical shock.

 Be careful not to expose your body directly to 

the outlet air for a long time. It may affect your 
physical conditions. 

 When using the air conditioner for infants, 

children, elderly, bedridden, or disabled people 
make sure the room temperature is suitable for 
those in the room.

 Never insert objects into the unit. Inserting 

objects can result in injury due to the high 
speed rotation of internal fans.

 Ground the air conditioner without fail. Do not 

connect the grounding wire to gas pipe, water 
pipe, lightning rod or telephone grounding 
wire. Incomplete grounding may cause electric 
shock.

 If anything is abnormal with the air conditioner 

(ex. a burning smell), stop the operation 
immediately and turn the circuit breaker OFF. 

 The appliance shall be installed in accordance 

with national wiring regulations. Improper 
cable connection can cause the power supply 
cord, plug and the electrical outlet to overheat 

and cause ire.

 If the supply cord is damaged, it must be 

replaced by the manufacturer or its service 

agent or a similarly qualiied person in order 

to avoid a hazard. Use only the manufacture-

speciied power cord for replacement. 

 Do not splash or pour water directly on the 

unit. Water can cause electrical shock or 
equipment damage.

 Do not attempt to install/remove/repair the unit 

by yourself. Incorrect work will cause electric 

shock, water leak, ire etc. Consult your dealer 

or other qualiied service personnel for the 

installation/removal/repair of the unit.

CAUTION

 Open a window or door periodically to 

ventilate the room, especially when using gas 

appliances. Insuficient ventilation may cause 

oxygen shortage.

 Do not operate the buttons with wet hand. It 

may cause electric shock.

 For safety, turn the circuit breaker off when not 

using the unit for an extended period of time.

 Check the outdoor unit mounting rack 

periodically for wear and to make sure it is 

irmly in place.

 Do not put anything on the outdoor unit nor 

step on it. The object or the person may fall 
down or drop, causing injury.

 This unit is designed for residential use. Do not 

use for other applications such as in a kennel 
or greenhouse to raise animals or grow plants. 

 Do not place a vessel with water on the unit. 

If water penetrates into the unit, electrical 
insulations may deteriorate and cause electric 
shock.

 Do not block the air inlets nor outlets of the 

unit. It may cause insuficient performance or 

troubles. 

 Be sure to stop the operation and turn the 

circuit breaker off before performing any 
maintenance or cleaning. A fan is rotating 
inside the unit and you may get injured.

 This appliance is not intended for use  by 

persons (including children) with reduced 
physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they 
have been given supervision or instruction 
concerning use of the appliance by a persion 
responsible for their safety. Childern should be 
supervised to ensure that they do not play with 
the appliance.

 Make sure to connect the air conditioner 

to power supply of the rated voltage and 
frequency. Use of a power supply with 
improper voltage and frequency can result in 

equipment damage and possible ire.

• Do not install the unit in a place where inlam

-

mable gas may leak. It may cause ire.

  Install the unit in a place with minimal dust, 

fumes and moisture in the air.  

 Arrange the drain hose to ensure smooth 

drainage. Insuficient drainage may cause wet

-

ting of the room, furniture etc.

 Make sure a leak breaker or a circuit breaker 

is installed, depending on the installation 
location, to avoid electrical shock.

  IMPORTANT SAFETY INSTRUCTIONS .............EN-1
  PART NAMES .....................................................EN-2
  USING THE REMOTE CONTROL ......................EN-4
  AUXILIARY MODE ..............................................EN-4
  TIPS ON SAVING ENERGY ................................EN-4
  BASIC OPERATION ............................................EN-5
  OPERATION CONDITION ..................................EN-5
  ADJUSTING THE AIR FLOW DIRECTION .........EN-6
 POWERFUL JET / SUPER JET OPERATION ....EN-6
  GENTLE COOL AIR ............................................EN-7
 PLASMACLUSTER OPERATION .......................EN-7
  COMFORT OPERATION ....................................EN-8
  BABY MODE OPERATION .................................EN-8
  TIMER OPERATION ...........................................EN-9
 SELF CLEAN OPERATION...............................EN-10
  DISPLAY BUTTON ............................................EN-10
 MAINTENANCE ................................................EN-11
  BEFORE CALLING FOR SERVICE ..................EN-12 

ENGLISH

Please read this manual carefully before using the product. 

   

This manual should be kept in a safe place for handy reference.

 CONTENTS

  

IMPORTANT SAFETY 
INSTRUCTIONS

AH-AP9SMD&ED_OM_A908_En.indd   1

2015/3/24   16:54:13

Summary of Contents for AH-A12SED





























Reviews: