12
Be sure to disconnect the power cord from the wall outlet or turn off the circuit breaker
before performing any maintenance.
CLEANING THE FILTER
If the filter is clogged with dust, the amount of air flow will be reduced, resulting in poor
cooling performance. The filter should be cleaned every 10 days. At the beginning of
every cooling season or if the air conditioner has not been used for a long period, clean
the filter before starting to operate the unit.
1.
REMOVE THE FILTER
Remove the grille by sliding it to the left until it
stops and then pull it towards you. Next lift and
unhook the bottom of the air filter and remove it.
To clean the front panel, grille and cabinet, wipe with a soft, dry cloth or with a cloth
moistened with a mild soap. Rinse carefully by wiping with a damp cloth and dry
completely.
Avoid splashing the unit with water. Excessive water will affect electrical insulation and
fire may be resulted during operation.
Never use erosive chemicals or abrasive cleaners on any part of the unit. To avoid
damaging the unit, do not use hot water of over 50°C when cleaning. To clean the
remote control, wipe with a soft
dry cloth.
CLEANING OF THE FRONT PANEL, GRILLE, CABINET AND THE REMOTE CONTROL
3.
2.
Grille
Air filter
1
2
MAINTENANCE
CLEAN THE FILTER
To remove dust from the filter, use a vacuum
cleaner or wash it with clean water.
If the filter is very dirty, wash it with detergent
and rinse carefully with clean water. Dry the filter
with a soft cloth. Do not expose the filter to heat
or dry it under direct sunlight.
RE-INSTALL THE FILTER
Fit the top hooks, and then hook the bottom of
the air filter. Replace the grille firmly. Never
operate the unit without installing the filter and
the grille. It may result in serious damage to the
unit.
1
2
NOTE:
OILING OF THE COMPRESSOR AND FAN MOTOR IS UNNECESSARY
The compressor is permanently lubricated and is hermetically sealed. The fan motor is lifetime
sealed and does not require oiling.
http://www.usersmanualguide.com/
