Sharp AE-X28MCJ, Operation Manual

Page: 22 / 32

,QVWDOOLQGRRUXQLW
,QVWDOOWKHUHDU SDQHO
$OZD\VPRXQWWKHUHDUSDQHOKRUL]RQWDOO\
)L[WKHUHDUSDQHORQWKHVHOHFWHGORFDWLRQ
%HVXUHWKDWWKHUHDUSDQHOKDVEHHQ
IL[HGILUPO\HQRXJKWRZLWKVWDQGWKHZHLJKW
RIDQDGXOWRINJIXUWKHUPRUHWKHZHLJKW
VKRXOGEHHYHQO\VKDUHGE\HDFKVFUHZ
,QVWDOOWKHSLSLQJKROH
0DNHWKHSLSLQJKROHLQWKHZDOODWDVOLJKWGRZQZDUGVODQWWRWKHRXWGRRU
VLGH
,QVHUWWKHSLSLQJKROHVOHHYHLQWRWKHKROHWRSUHYHQWWKHFRQQHFWLRQ
SLSLQJDQGZLULQJIURPEHLQJGDPDJHGZKHQSDVVLQJWKURXJKWKHKROH
,QVWDOOWKHZDWHUGUDLQDJHSLSH
)RUZHOOGUDLQLQJWKHGUDLQKRVHVKRXOGEHSODFHGDWD
GRZQZDUGVODQW
'RQRWZUHQFKRUEHQGWKHGUDLQKRVHRUIORRGLWVHQG
E\ZDWHU
:KHQWKHORQJGUDLQDJHKRVHSDVVLQJWKURXJKLQGRRU
VKRXOGZUDSWKHLQVXODWLRQPDWHULDOV
:UHQFKHG
%HQW
)ORRGHG
,QGRRU 2XWGRRU
:DOO SLSH
6HDO SDG
)LJ
5HDUSLSLQJKROH
5HDUSLSLQJKROH
/HIW 5LJKW
0DUNRQWKHPLGGOHRILW
*UDGLHQWHU
6SDFHWR
WKHZDOO
PP
DERYH
6SDFHWR
WKHZDOO
PP
DERYH
:DOO
:DOO
&RQQHFWLQGRRU HOHFWULFZLUHV
and leveled to ensure correct drainage.
1.Pull up the front panel cover to open.
2.Undo the fixing screw of the cover plate and remove.
3.Pull the power and communications cable through the back of the indoor unit.
4.The communications cable can be plugged in (CN13) without taking off
the front cover (if required use long nose pliers to plug in). All the wiring
should be connected according to the circuit diagram on the unit
5.Make sure when placing the power cable into the wire groove that it has
sheath. To be confident that the power cable is connected securely,
give it a slight tug.
6.Place the cover plate back on and screw in the fixing screw.
7.Close the front panel cover.