7
Operation of wireless remote control con’t.
TIMER ON button –
selects or presets a time you wish the air conditioner to turn on.
Press this button to select TIMER ON setting. Pressing the
or
button during the first 5
seconds adjusts the time value by one minute each time pressed. Holding the
or
button down
for more than 2 seconds changes the time rapidly. While time is blinking, press TIMER ON button
to confirm setting. After setting, repressing the TIMER ON button cancels the operation.
Note: To operate TIMER ON function correctly set the clock to the current time.
TIMER OFF button –
selects or presets a time you wish the air conditioner to turn off.
Press this key to enter TIMER OFF setup, in which case the TIMER OFF icon will blink. The
method of setting TIMER OFF is the same as TIMER ON.
TEMP button
Press this button to set up and select: setting temperature (displaying the room), indoor ambient
temperature (displays current indoor temperature), outdoor ambient temperature (displays current
outdoor temperature), if there is no outdoor ambient temperature the original display status will
circulate as follows: No signal displayed. Remark: when operating this button the setting
temperature is displayed all the time on the wireless remote control.
I FEEL button
Press this button once to turn on the I FEEL function. When the “I FEEL” symbol is displayed the
remote control will send a temperature reading to the indoor unit every 10 minutes. The air
conditioner will adjust accordingly to remote control location. Press the “I FEEL” button again to
cancel operation.
About X-FAN function: This function indicates that the indoor fan will continue to blow after the unit is
turned off so moisture in the indoor unit will be removed. This will help avoid mould.
1. Having set X-FAN function on; Turning off the unit by pressing ON/OFF button indoor fan will continue
running for about 10 min. at low speed. In this period, press X-FAN button to stop indoor fan directly.
2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the unit will be shut
down directly
.
About AUTO RUN function:
When AUTO RUN mode is selected, the setting temperature will be
displayed on the display, the unit senses the room temperature automatically to select a suitable running
method for room comfort.
About TURBO function: When TURBO mode is selected the unit will run at super-high fan speed to cool
or heat quickly so that the ambient temperature approaches the preset temperature as soon as possible.
About LOCK: Press
or
buttons
simultaneously to lock or unlock the keypad. If the remote controller
is locked, the icon will be displayed on it. In which case, press any button, the mark will flicker three
times. If the keyboard is unlocked, the mark will disappear.
About switch between Fahrenheit and Centigrade: Under status of unit off, press MODE and
button
simultaneously to switch between °C and °F.
About Quiet function: If Auto Quiet mode has been selected, after the room temperature reached the
setting temperature or 10mins later, the air conditioner will immediately enter into the Quiet running status,
at this time the fan speed is not adjustable.
