background image

ENGLISH

E-9

During operation, if the outdoor temperature changes, the temperature settings will automati-
cally slide as shown in the chart.

MODE CHANGEOVER 

(only for models AY-X08BE/AY-X10BE/AY-X13BE)

During seasons when you need COOLING at daytime and HEATING at night, or if the room
temperature should become extremely higher than the temperature setting, due to supplemen-
tary heating equipment, the mode will automatically switch between HEAT and COOL mode to
keep the comfortable room temperature.

TIPS ABOUT AUTO MODE

In the AUTO mode, the temperature setting and mode are automatically selected according to
the room temperature and outdoor temperature when the unit is turned on.

Modes and Temperature Settings for Models
AH-X08BE/AH-X10BE/AH-X13BE

Modes and Temperature Settings for Models
AY-X08BE/AY-X10BE/AY-X13BE

the figures in (  ) are temperature settings

the figures in (  ) are temperature
settings

TIPS ABOUT INDICATOR PANEL

The indicator panel will change each time you press
the DISPLAY button in the following manner.

The room temperature and
POWER MONITOR are displayed.

The outdoor temperature and
POWER MONITOR are displayed.

No display.

POWER MONITOR

When the room temperature or the outdoor temperature is displayed, the POWER MONITOR
will light up in 4 levels (3 levels for DRY mode), to indicate the operation power.
When the air conditioner is operating at maximum power in the COOL (and HEAT for AY-
X08BE/AY-X10BE/AY-X13BE)mode,"Power" will light and "Eco" will turn off on the indicator
panel.

NOTES:

• The displayed temperatures are rough estimates and may vary from the actual temperatures.
• Temperature display ranges

Room temperature: 0°C ~ 40°C ( 

 is displayed when less than 0°C and 

 when higher

than 40°C)
Outdoor temperature: -9°C ~ 45°C ( 

 is displayed when less than -9°C and 

 when higher

than 45°C)

 is displayed during the first minute of operation while the temperatures are being detected.

• Only the room temperature can be displayed when the unit is not in operation.

DISPLAY

FULL

POWER

29

21

28

34

outdoor

temp.

indoor temp.

Cool

(24¡C)

Cool

(25¡C)

(¡C)

(¡C)

Cool

(26¡C)

Dry

(

)

Room Temp.

-2¡C

29

21

28

18

10

0

34

(¡C)

(¡C)

Cool

(24¡C)

Fan

Cool

(25¡C)

Heat

(22¡C)

Dry

(

)

Heat

(23¡C)

Heat

(24¡C)

Cool

(26¡C)

outdoor

temp.

indoor temp.

Room Temp.

-2¡C

Room Temp. Lamp

Temperature

Indicator

POWER MONITOR

Outdoor Temp. Lamp

ECO

ECO

Summary of Contents for AE-X08BE





















Reviews: