background image

1

ENGLISH

Thank you for purchasing a SHARP air conditioner. Please read this manual carefully
before operating the product.

• PRECAUTIONS ................................................ 1
• ADDITIONAL NOTES ON OPERATION .......... 3
• TIPS ON SAVING ENERGY ............................. 3
• PART NAMES ................................................... 4
• USING THE REMOTE CONTROL ................... 6
• BASIC OPERATION ......................................... 8
• ADJUSTING THE AIR FLOW DIRECTION .... 10

CONTENTS

• ONE-HOUR OFF TIMER ...................... 11
• TIMER OPERATION ............................. 12
• AUXILIARY MODE ............................... 14
• MAINTENANCE .................................... 15
• BEFORE CALLING FOR SERVICE ..... 16
• SPECIFICATIONS ................................ 17

PRECAUTIONS

WARNINGS FOR USE

1

This model should be installed with a fixed power cord to the meter box.

2

Be careful not to expose your body to the outlet air for prolonged periods. It may affect
your physical condition.

3

When using the air conditioner for infants, children, elderly, bedridden or disabled people
make sure the room temperature  is suitable for those in the room.

4

Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of the internal fans.

5

If anything abnormal with the air conditioner (eg burning smell), stop the opertaion
immediately and turn the circuit breaker off.

6

This air conditioner should be installed by a licensed air conditioning contractor in
accordance with AS/NZS 3000:2000 and your electricity suppliers rules.

7

There are local council rules regarding maximum allowable noise levels emitted by air
conditioners, your licensed air conditioning contractor will advise you on the correct
location of your outdoor unit.

8

Use only the manufacture-specified power cord for replacement. Replacement should be
performed by a service centre approved by SHARP.

WARNINGS FOR INSTALLATION / REMOVAL / REPAIR

For your safety, ensure that your new air conditioner is installed by a licensed air
conditioning contractor in accordance with the AUSTRALIAN/NEW ZEALAND WIRING
RULES.

• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric

shock, water leak, fire etc.  Consult a licensed air conditioning contractor for the installation/
removal/repair of the unit.

Summary of Contents for AE-A09CJ





















Reviews: