Connectivity
113
To Turn Off Automatically
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Bluetooth Timeout”
1.
Select the desired time.
Your phone turns the function off automatically after the specified
time.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two modes;
talking with the handsfree kit or talking with the phone.
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Handsfree Setting”
1.
Select “Private mode” or “Handsfree mode”.
“Private mode”:
For talking with the phone
“Handsfree mode”:
For talking with the handsfree kit
To Turn the Authentication Request On or Off
You can request the sender or receiver of the OBEX data to
authenticate the passcode (exchanging the passcode) before pairing
devices.
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Authentication”
1.
Select “On” or “Off”.
Note
•
No authentication is required for the paired devices.
•
Even if you select “Off”, you may authenticate the passcode when
the sender requests it.
To See Your Phone Details
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“My Phone Details”
Infrared
In order to use the infrared function, you need to search for other
infrared enabled devices to establish contact with your phone. Keep
your phone within a distance of 20 centimetres from the other phone
before searching. The infrared setting will return to off when no data
is transmitted/received via infrared communication.
Turning On or Off
“Connectivity”
→
“Infrared”
→
“Switch On/Off”
1.
Select “On” or “Off”.
The infrared setting is activated, and “
” is displayed.
Sending All Data to Other Devices
“Connectivity”
→
“Infrared”
→
“Send All”
1.
Enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Changing the Handset Code” on page 108.
2.
Select the desired data to send.
3.
Enter the authorisation code.
(M 10-2)
(M 10-2-1)
(M 10-2-2)
