Sharp 902SH, Service Manual

Page: 54 / 121

902SH
3 – 6
CONFIDENTIAL
[3] Precautions for installing the thin coax-
ial
Attach the connector cover before installing the thin coaxial.
After the installation, leave the connector cover off.
Part Code Description
PCOVPA003AFZZ Cover, Connector
Hinge Unit
Blue
Wire Holder B
Fix Holder, Hinge
Hole B
Hinge Unit
Fit the hooks of the
hinge holder.
Fit the hooks of the
hinge holder.
The thin coaxial connector
should be routed through the
wire holders A and B
beforehand.
Holder, Hinge
Hole A
Hole B
Hinge Unit
Cover,
Connector
Thin Coaxial
(Earth FPC)
Thin Coaxial
(Cable)
a
b
A
Thin Coaxial
Fix the "A" part and bend the
thin coaxial into an N shape to
insert the hole A. This prevents
twisting of the thin coaxial (ca-
ble/earth FPC).
Hinge Unit
Earth FPC
When routing through the hole
B, straighten the thin coaxial and
continue to make arcs with it.
Sagging must be
out of the hole B.
Position the thin coaxial
(earth FPC) outside the
thin coaxial (cable). Pay
special attention to the
sections "a" and "b".
Adjusting the length, insert the
thin coaxial into the hinge holder.
The earth FPC must
be in contact with the
hinge unit.
Nitoflon
overlap
area
End face
of the
earth
FPC
The end face of the earth FPC
must be within this range.
(Keep it inside the hinge.)
Yellow
Wire Holder A