Sharp 550SH, User Manual

Page: 125 / 161

124 Settings
Bluetooth Wireless Settings
With this setting you can rename your phone, prevent
other phones from recognising your phone, turn the
Bluetooth wireless function off automatically to save
battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown in
other devices when your phone is detected.
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Device Name”
1.
Enter the new device name.
To Turn Off Automatically
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Bluetooth Timeout”
1.
Select the desired time.
Your phone turns the function off automatically
after the specified time.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the
phone.
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Handsfree Setting”
1.
Select “Private mode” or “Handsfree mode”.
“Private mode”:
For talking with the phone
“Handsfree mode”: For talking with the handsfree
kit
To Turn the Authentication Request On or Off
You can request the sender or receiver of the OBEX
data to authenticate the passcode (exchanging the
passcode) before pairing devices.
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Authentication”
1.
Select “On” or “Off”.
Note
• No authentication is required for the paired devices.
• Even if you select “Off”, you may authenticate the
passcode when the sender requests it.
(M 12-1-6)