Sharp 32C540 Page 40 Operation Manual Download

Page: 40 / 47

Using the Video and Audio Input Terminals (Continued)

•

To watch video material playback

• Press the Remote’s

INPUT

button to select the VIDEO INPUT mode for the video equipment you

wish to play

• The external VIDEO INPUT mode will change as follows each time the

INPUT

button is pressed.

• When the AV cables are connected to the VIDEO INPUT 3 and COMPONENT Y, P

and P

terminals

simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.

• INPUT mode can be selected by pressing either the

on the TV remote control when the TV is

set to the highest channel stored in memory, or by pressing the

when it is set to the lowest

channel.

• When connecting video or audio equipment to the television, be sure that the power is turned off in

order to prevent damage to either the television or the equipment being connected.

• The S-Video terminal has priority over the VIDEO terminal (IN 1). When you wish to use video equipment

connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal.

• For detailed information on the connection and use of auxiliary equipment, refer to the instruction

manuals of the equipment being used.

• The connection cables/cords can be obtained from your local video store.

AIR

CABLE

INPUT 1

(IN 1)

Rear

INPUT 2

(IN 2)

Front

INPUT 3 (COMPONENT)

(IN 3)

Rear

Note:

VCR

(Rear connection terminals of TV)

TO S-VIDEO OUTPUT
(When your video
equipment has an
S-VIDEO output terminal).

To AUDIO
OUTPUT (L/R)

To COMPONENT
VIDEO OUTPUT
Terminals

To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)

To VIDEO OUTPUT

Video Equipment with Component
video (Component Color)
Output Terminals (Y, P

and P

)

Notes:

• COMPONENT terminals are DVD compatible, allows you to enjoy the highest quality playback

image than the image from IN 1 S-VIDEO terminal.

• The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals.
• The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio

cable to the IN 1 AUDIO terminals (left and right).

32C540

Summary of Contents for 32C540
















































Search results

Summary of Contents for 32C540

Reviews:

Related manuals for 32C540

Brands by name

Popular brands

Sharp 32C540, Operation Manual

Search results

Summary of Contents for 32C540

Reviews:

Related manuals for 32C540

Brands by name

Popular brands