Sharp 32C530 Operation Manual Download

Page: 42 / 60

Dimension: 140 X 215 mm

100

POWER

DVD

VCR

MENU

MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

STOP

REC

REW

PLAY

CH/SKIP

VOL

—

VOL

ENTER

PERSONAL PREFERENCE

CATV

DVD

VCR

Operation of Universal Remote Control (Continued)

•

How to identify a VCR

The remote control may already be set to
operate your VCR. Try this initial check before
going on to the following “identifying” section.

(1) Slide

CATV/DVD-TV/VCR

switch to VCR.

(2) Point the Remote towards VCR and press

POWER (DVD/VCR)

(3) Does the Remote turn the VCR ON and OFF?

• If yes, the Remote is ready to operate the VCR

and no further steps are needed.

• If no, continue to the “identifying” section.

Direct Entry Method

Refer to the following steps and list to quickly
find the remote control code for your accessory
VCR.

• First look up your VCR’s remote control code

number before going through the Direct Entry
Method.

• If this procedure does not identify your

accessory VCR, use the Search Method of
identification (described in the next section).

(1) Slide

CATV/DVD-TV/VCR

switch to VCR.

(2) Press and hold down

DISPLAY

and

your remote control.
Then release both buttons.

(3) Within 10 seconds after releasing

DISPLAY

and

, enter your VCR’s two-digit remote

control code number using the

REMOTE

KEYPAD

(refer to the list on page 44).

• The remote control is now ready to send

commands to your VCR.

Some brands have more than one remote code
listed, due to changes in the remote codes
from early to later model years, or due to format
differences (VHS/BETA). In such cases, you
may have to try more than one code to find
the code your VCR accepts.

Note:

Depending on the model, year produced,
brand, and type of VCR, some models may
not be compatible with the remote control.

Search Method

(1) Slide

CATV/DVD-TV/VCR

switch to VCR.

(2) Press POWER of the VCR to ON.
(3) Stand at least 6 feet away from the front of the

VCR.
Point the Remote towards the VCR.
Hold down

DISPLAY

and

at the same

time. KEEP HOLDING THE BUTTONS
DOWN.

(4) Watch the channel number indicator on the

VCR, channel numbers will scan up when the
VCR has been identified.
Release

DISPLAY

and

as soon as the

channel numbers start to scan up.
The VCR’s remote control code number has
been identified, and the Remote is ready to
operate the VCR.

DVD/VCR
POWER

DISPLAY

CHANNEL
UP (

DOWN (

)

CATV/DVD-TV/VCR

REMOTE
KEYPAD

TV
POWER

32C530(41-45)

1/29/03, 2:26 PM

Summary of Contents for 32C530





























































Search results

Summary of Contents for 32C530

Reviews:

Related manuals for 32C530

Brands by name

Popular brands

Sharp 32C530, Operation Manual

Search results

Summary of Contents for 32C530

Reviews:

Related manuals for 32C530

Brands by name

Popular brands