background image

16

Dimension: 140  X 215 mm

Parent Control (V-CHIP Operation) (Continued)

• TV PARENTAL GUIDELINES (Example)

Example 1.1 : Age Based setting
Clear 

V

s (block) from each "AGE" box for all ratings.

This will automatically unblock everything.

Example 1.2 : Age Based setting
For “TV-G” put a 

V

 in the "AGE" box. This will automatically block the

higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.
Please note the content ratings “D”, “L”, “S”, “V” are automatically blocked
as well.

Example 2.1 : Content Based setting
If you choose to unblock every content-based items (“D”, “L”, “S”, “V”),
clear the 

V

 (block) from each “AGE” box of “TV-PG”, “TV-14” and “TV-

MA”.

Example 2.2 : Content Based setting
Put a 

V

 in the box corresponding to “TV-PG” (row) and “V (Violence)”

(column). This will automatically block the “V” boxes for “TV-14” and
“TV-MA”. Setting only “TV-PG-V”, “TV-14-V” or “TV-MA-V” will not block
all programs rated “TV-PG”, “TV-14” or “TV-MA”.

Example 3 : Resetting an Age Based setting
For “TV-14”, put a 

V

 (block) in the “AGE” box.

This will again automatically block the content ratings “D”, “L”, “S”, “V”
for “TV-MA” as well as “TV-14” (“D” is not available for “TV-MA”).
Please note that the lower age rating “TV-PG” does not change from its
previous settings after this.

Note:

• Content ratings can be modified but only in the combinations indicated by 

V

 in the table on page 15.

• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age

rating’s content setting to “BLOCK” regardless of their previous settings.

• Changing a lower rating’s “AGE” setting to “BLOCK” automatically changes all higher ratings to “BLOCK”

regardless of their previous settings.

• For “TV-Y7”, “TV-PG”, “TV-14” and “TV-MA”, if you clear the 

V

 in the “AGE” box (unblock) you can still

change settings based on content.

• Clearing a higher rating’s age or content setting will not clear lower settings. Make sure that all undesired

boxes are blocked.

[3] ADDITIONAL MODE

Besides  “MPAA RATINGS” and “TV PARENTAL GUIDELINES”, new ratings system’s data can be
downloaded when they become available. (See page 19.)

TV – Y
TV – Y 7
TV –G
TV – PG
TV – 1 4
TV –MA

MENU : RETURN

G

A E

D

L

S

V

V :

:

B LOCK

V I EW

FV

TV – Y
TV – Y 7
TV –G
TV – PG
TV – 1 4
TV –MA

MENU : RETURN

G

A E

D

L

S

V

V

V

V

V

V

V

V

V

V

V

V

V

V
V

V

V

:

:

B LOCK

V I EW

FV

TV – Y
TV – Y 7
TV –G
TV – PG
TV – 1 4
TV –MA

MENU : RETURN

G

A E

D

L

S

V

V :

:

B LOCK

V I EW

FV

TV – Y
TV – Y 7
TV –G
TV – PG
TV – 1 4
TV –MA

MENU : RETURN

G

A E

D

L

S

V

V :

:

B LOCK

V I EW

FV

V
V
V

TV – Y
TV – Y 7
TV –G
TV – PG
TV – 1 4
TV –MA

MENU : RETURN

G

A E

D

L

S

V

V :

:

B LOCK

V I EW

FV

V
V

V
V

V
V

V

V

V

32C240(14-16)

03.11.28, 0:48 PM

16

Summary of Contents for 32C241
















































Reviews: