Sharp 29fl90, Service Manual

Page: 8 / 38

8
29FL90
SERVICE
NUMBER
DATA
ADJUSTMENT ITEM
INITIAL VALUE
RANGE
ADJUSTMENT CONTENTS
D06 V-S CORRECTION 8(08h) 0-15(00h-0Fh) Must be set to “08”
D07 EW PARABOLA 33(21h) 0-63(00h-3Fh) Must be set to “04”
D08 EW TRAPEZIUM 14(0Eh) 0-31(00h-1Fh) Must be set to “0E”
D09 EW CORNER 12(0Ch) 0-15(00h-0Fh) Must be set to “04”
D10 AFC GAIN 2(02h) 0-3 (00h-03h) Must be set to “02”
D11 V EHT 7(07h) 0-7 (00h-07h) Must be set to “04”
D12 H EHT 3(03h) 0-7 (00h-07h) Must be set to “04”
EX1 FAO VOLUME 36(24h) 0-50(00h-32h) Must be set to “24”
EX2 CC-POSITION 33(21h) 0-127(00h-7Fh)
EX3 INT 122(7Ah) 0-255(00h-FFh) Must be set to “7A”
EX4 A-ATT 90(5Ah) 0-127
EX5 TUNER data 0(00h) 0-3(00h-03h) Must be set to “00”
EX6 Think chip-Slice LEVEL 54(36h) 0-255(00h-FFh) Must be set to “36”
OP1 OPTION1 BA 0-255(00h-FFh) Must be set to “C5”
OP2 OPTION2 01 0-7 Must be set to “1A”
OP3 OPTION3 15(0Fh) 0-255(00h-FFh) Must be set to “0F”
M01 INPUT LEVEL 9(09h) 0-15(00h-0Fh) Must be set to “09”
M02 MTS VCO 36(24h) 0-63(00h-3Fh)
M03 FILTER 31(1Fh) 0-63(00h-3Fh)
M04 WIDEBAND 24(18h) 0-63(00h-3Fh)
M05 SPECTRAL 16(10h) 0-63(00h-3Fh)
NECESSARY UNNECESSARY
ADJUSTMENT
PART REPLACED
IC2001
IC201
X
Data is stored in IC2102(or IC2101).
The adjustment is needed to compensate for characteristics of parts
including IC201 and MTS level (M01).
Holding down both the VOL-up and CH-up buttons on the TV set at service mode for more than 2 seconds will
automatically write the above initial values into IC2102(or IC2101).
NOTES
X
IC2102
(or IC2101)
IC3001
CRT
Holding down both the VOL-up and CH-up buttons on the TV set in the
service mode for more than 2 seconds will automatically write the above
initial values into IC2102(or IC2101) Then perform a complete adjustment.
Adjust items related to picture tube only.
Adjust items related to MTS only (M01~M05).
Table - B
X
X
X
Table - A
Note: IC2101 when using VHIM24C16B/-1
IC2102 when using VHIBR2416E2-1
*