manualshive.com logo in svg

Sharp 28KF-84H, Operation Manual, Page: 36 / 44

Share
Download
Sharp 28KF-84H Operation Manual Download Page 36

35

SHARP VCR can be operated using the TV remote control.

Channel selector buttons (VCR)  

CH 

These buttons are used for changing channels and setting the timer.

Play button   

Press this button to start playback.

Record button   

Press this button to start recording. If the videocassette is protected

against recording, it will be ejected.

Stop button   

Press this button to stop playback or recording.

Operate button 

VCR

Press this button to turn your VCR on. 

Fast forward/picture search forward 

and Rewind/picture

search reverse  

buttons

Both these buttons have the following function:

Fast Forwarding and Rewinding

To move through the cassette faster, press the STOP button  

to stop and then press the 

or 

button to fast forward or

rewind the cassette.

Press the STOP button  

to stop fast forward or rewind.

Picture Search

During playback, press the 

button for forward picture search,

or the 

button for reverse search.

Press the PLAY button 

to resume normal playback.

For further details, please refer to operation manual of your VCR. 

VCR mode

Summary of Contents for 28KF-84H













































Reviews:

No comments