background image

9

28JW-74H

Corner Symmetry

Adjust the Corner Symmetry so that the picture is centred.
The effect of this adjustment is shown in figure 7.
Note: This adjustment affects to upper and lower sides.

• 

When the volume up button is pressed, side pincushion changes from barrel shape to

pincushion.

• 

When the volume down button is pressed, side pincushion changes from pincushion to

barrel shape.

• 

Press the stand-by button on the remote control to store.

Vertical Linearity

Adjust the Vertical Linearity so that the upper and lower parts of the picture are symmetrical.
The effect of this adjustment is shown in figure 8.

• 

When the volume up button is pressed, the upper picture scanning decreases and the

lower picture scanning increases.

• 

When the volume down button is pressed, the upper picture scanning increases and the

lower picture scanning decreases.

• 

Press the stand-by button on the remote control to store.

Vertical Angle

Adjust the Vertical Angle so that the picture is centred.
The effect of this adjustment is shown in figure 9.

• 

When the volume up button is pressed, the vertical angle changes to right.

• 

When the volume down button is pressed, the vertical angle changes to left.

• 

Press the stand-by button on the remote control to store.

Vertical Bow

Adjust the Vertical Bow so that the picture is centred.
The effect of this adjustment is shown in figure 10.

• 

When the volume up button is pressed, the vertical bow changes to right.

• 

When the volume down button is pressed, the vertical bow changes to left.

• 

Press the stand-by button on the remote control to store.

Vertical Amplitude

Adjust the Vertical Amplitude so that 8% over-scan is achieved.
The effect of this adjustment is shown in figure 11.

• 

When the volume up button is pressed, the vertical size of the picture increases.

• 

When the volume down button is pressed, the vertical size of the picture decreases.

• 

Press the stand-by button on the remote control to store.

S Correction

Adjust the S Correction so that the picture symmetrical between the top, centre and bottom.
The effect of this adjustment is shown in figure 12.

• 

When the volume up button is pressed, the top and bottom scanning increases and the

centre scanning decreases.

Figure 8

Figure 12

Figure 11

Figure 10

Figure 9

Figure 7

Summary of Contents for 28JW-74H

































































Reviews: