CAUTION : DANGEROUS
VOLTAGE INSIDE
TO PREVENT ELECTRIC SHOCK.
DO NOT REMOVE COVER.
NO UBER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONAL.
AV-1 IN
OUT
AUDIO
VIDEO
Standard DIN45325
plug (IEC169-2)
75-ohm
coaxial cable
(round cable)
(not supplied)
300-ohm
twin-lead
flat feeder
(not supplied)
75-ohm
impedance
converter
(not supplied)
Antenna in
TV
CAUTION : DANGEROUS
VOLTAGE INSIDE
TO PREVENT ELECTRIC SHOCK.
DO NOT REMOVE COVER.
NO UBER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONAL.
AV-1 IN
OUT
AUDIO
VIDEO
Antenna in
TV
VCR
To antenna
in terminal
To RF out
terminal
TV set
[ TV set (Bottom) ]
Using headphone
Insert headphone plug into headphone jack to listen to audio with
headphone.
• The audio from the speaker is turned off.
The following accessories are included with this television.
Remote Control
Size-AA batteries
Operation manual
300-75 impedance converter
(only for 14J1-RU)
• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.
• If you are using a rod antenna and the signal from TV station is weak or not clear, the picture may not display clearly
or properly. In this case, we recommend that you use an outdoor antenna.
MENU/
PRESET
CH
VIDEO
AUDIO
POWER
AV-2 IN
Bottom
CH
Power indicator
Power can be turned on by the
remote control when the indicator
is dimly.
MENU/PRESET button
Tunes the channels.
Used for MENU setup.
MENU/PRESET
Volume up/down buttons
Adjusts the volume.
Makes adjustments in PRESET.
Channel up/down buttons
Selects the channels.
Tunes or sets the channels.
Headphone jack
Use to listen to the audio
with headphone.
Video input terminal (AV-2 IN)
Connects to a camcorder,
video game, etc.
Audio input terminal (AV-2 IN)
Connects to a camcorder,
video game, etc.
Infrared sensor window
Receives the infrared wave from
the remote control.
POWER
POWER switch
Turns on and off the
main power.
CH
CH
/
/
• To avoid injuring your hearing, do not put on the headphone before plugging them into the headphone jack and before
the power is turned on.
E4
PART NAMES
E2
ACCESSORIES
E3
BEFORE OPERATING TELEVISION
Rod antenna (dipole)
with ribbon feeder
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC 169-2),
plug it into the antenna jack at the rear of the set.
Connecting to an antenna
Connecting to an antenna via a VCR
If your outdoor antenna uses a 300-ohm twin-lead
flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
(1) Insert the rod antenna's base post into the
antenna mounting socket until it clicks into
position.
(2) Connect the feeder to the impedance converter.
(3) Plug the impedance converter into the antenna
jack at the rear of the set.
• Rod antenna and impedance converter are only
included in model 14J1-RU.
AV-1 IN
OUT
AUDIO
VIDEO
CAUTION : DANGEROUS
VOLTAGE INSIDE
TO PREVENT ELECTRIC SHOCK.
DO NOT REMOVE COVER.
NO UBER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONAL.
Rod Antenna
Feeder
Impedance
Converter
Antenna
mounting socket
Antenna jack
(14J1-RU)
Rod antenna connection
This operation manual is for
14J1-RU and 21J1-RU. The
illustration of 21J1-RU is used in
this operation manual.
(21J1-RU)
21J1-RU[EN]
7/9/05, 11:22 am
2
