420 774 335 397 www.sharks-shop.cz Stránka 37
medical help. Liquid ejected from the battery may cause irritation or burns.
● Never immerse tool or the charger in water or other liquids.
● Protect batteries and charger from moisture. Do not use the charger outdoors in bad
weather.
● Do not drop the battery and charger. Do not apply pressure or any other form of
mechanical stress.
● Use a cordless drill at an ambient temperature between 0-40°C. Always charge and storing
the battery pack between temperatures 0ºC to 30ºC.
IMPORTANT WARNINGS
Danger! Never short the battery or expose it to moisture. Do not store it together with
metal parts that could cause short circuits. There is a risk of battery overheating,
eventually burning or exploding.
If you come into contact with acid or similar internal fluid or substance contained in
the battery, immediately wash the affected area thoroughly with plenty of water. If
these substances come into contact with your eyes, rinse thoroughly with water and
seek medical attention immediately.
Do not place the rechargeable battery in fire or water! There is an explosion!
Rechargeable batteries should not be disposed of in conventional household waste
but in a local collection yard in accordance with regulations or handed over to
retailers of "Appliance batteries".
6) Service
● Have your power tool serviced only by an authorized service center. This will ensure safe
maintenance of repaired power tools. Faulty parts will be replaced by an authorized Sharks
service.
● Do not attempt to open and disassemble the tool, battery, or charger.
● Clean the tool only after disconnecting it from the charger. Use only a damp cloth in a mild
detergent solution. In any case, do not use solvents, alcohol, gasoline or other strong
chemicals to clean the product.
SPECIAL SAFETY PRECAUTIONS
● Some wooden products can create dust that is hazardous to your health. When using this
device, it is advisable to use an approved dust mask in addition to the dust extraction device.
● Hold your hands outside the cutting area and blade.
● Hold both hands on the saw, do not touch the workpiece.
● Never hold the piece that is cut in the hands or feet. Fix the workpiece on a stable platform
and fasten it securely.
● Hold the tool only with the insulated handle. If the wire is in contact with the cable, it will
prevent the operator from getting injured.
● Always use a disc with the correct size and shape. A knife that does not respond to the
instrument may damage it or injure the operator.
● Never use the appliance unless it is complete, damaged, or damaged.
● Do not allow side pressure to be applied to the blade.
● Do not use a blade that is bent or has missing parts (such as teeth). This could result in
operator injury or damage to the instrument.
● Always keep the unit clean (no dust).
● Before working, check the workpiece for any nail or screw to avoid damaging the blade.
● Ensure that there is no obstruction under the workpiece. Hold the machine correctly and
keep upright.
● Use a clamp or stable platform when securing the workpiece. Workpiece instability may
result in injury or damage to the product.
